RHEEM 174119 - Limit Switch Auto Reset SPST (Board Mount)

Limit Switch - Auto Reset (Board Mount)

The RHEEM 174119 Limit Switch - Auto Reset (Board Mount) is a part of the RHEEM Limit Switches product family. It has a current rating of 10A @ 120V AC. With a voltage rating of 120, it's voltage protection class is B. It weighs approximately 1 lbs.

RHEEM 174119 limit switch - auto reset (board mount) can be used with RHEEM's line of QTX pumps.

The 174119 Limit Switch - RHEEM Board Mounted, Auto Reset - SPST (Single Pole Switch, Single Throw), Contact Rating 15 Amp @ 120 VAC - UL/CSA Listed

With an operating temperature range of -40 °F to 160 °F (-40 °C to 71 °C) the RC174119 Limit Switch provides protection against potentially damaging contactor overloads. It offers a built in automatic reset and can be used with RHEEM wiring devices in a variety of applications. The RC174119 comes in board mount configuration for easy installation into control panels.

Board Mount Limit Switch, SPST, Factory Set to Off, Momentary/Alternate Action (NO or NC) . 5A at 125VAC/30VDC with 1/8"x1-1/4" Backset.

RHEEM Limit Switches are designed to control the energizing and de-energizing of power to a motor. The single pole, SPST indicates either energized or de-energized status. The switch is normally open. The reset feature on this board mount limit switch resets when power is removed from the load. These high quality switches have a catalog temperature range of 40degC to 90degC, can handle voltage from 250VAC to 415VAC and have resistance of 58 Ohms max at 500VDC.

The Rheem 3-wire, limit switch resets automatically upon reaching the pre-set position. The limit switch is actuated by a button or a lever control. The manual override allows full control when the unit is in "Auto" mode. This feature is designed to stop a unit before it goes out of specified operating limits and maintain an in-position strategy.