Johnson Controls P100AP-361 50#Opn 90#Cls SPST-Auto PrsSwt

50#Opn 90#Cls SPST-Auto PrsSwt

The Johnson Controls P100AP-361 50#Opn 90#Cls SPST-Auto PrsSwt is a two input, single output probe that is 4MM banana plug compatible.

The 50/90 pound Open/Close Push Button Emergency Power Supply Switch is intended for use in applications where failure to open the circuit could result in possible personal injury, death, or property damage.

The Johnson P100AP-361 is a 1/2HP, 90 PSI, Open Center, Normally Closed, Pressure Switch with Adjustable Pressure Setting.

The Johnson Controls P100AP-361 is ? auto-prestressing toggle switch, selectable rating scale. It is available in clear. This product has long lasting durability and high functionality. It is ideal for commercial use including institutional food service establishments, bakeries, restaurants and cafeterias.

P100AP-361 is a 100% pure, open frame, piercing style thermal magnetic actuator designed specifically for application in residential, commercial, health care facilities and light industrial applications. Applications include but are not limited to: room light controller, ceiling fan control, irrigation timer, sprinkler valve control and individual zone control systems. The P100AP-361 has two wire lead provisions for local switching the device into either the normally open or normally closed state.

The Amerex P-100AP is a pressure auto-release breakaway side post lantern with a D.O.T. approved, fixed brass wick tip and a fixed tip wick extension on a part-threaded cap stem. Swinging for operation by a single person, the P-100AP has a manual release for emergency closing.

The Johnson Controls P100AP manual actuator is designed to work with 1/4" to 3/8" thick panels. It has a maximum force rating of 50 lb-in. and operates at 0.3 A.

An INNOVATIVE AUTOMATIC LOCKING-STOPPER RECOMMENDATION FOR WATER APPLIANCES.

The Johnson Controls P100AP-361 is a three pole 120 Vac, 50/60Hz, 1 or 2 HP at 277VAC and uses a 3 phase VFD (variable frequency drive) which controls the power to the motor. The control also monitors and provides protection to the motor.

Available in a standard pole or a hard wired 3/4" diameter 1"-4" outlet center-of-gravity switch, the P100 applies 1 million cycles of short circuit life with 1 million cycles of dust life. The 1/4 watt, 24 volt 0.05 amps fast impulse hold heater rated at 2,000 watts. Wire leads made from 20 AWG copper wire with 1/4" gold plugs.

Revolutionary sensing solid-state relay protects inductive loads, cuts energy loss to less than 1 watt. Uses Halogen lamps with tungsten filament. The rugged aluminum die-cast housing is compact and light weight. Rated for continuous operation at 90 Vac, 50/60 Hz. 15 Amp, 277 Volt AC.

This power supply is a sealed, transformerless, single-output switchmode DC-DC converter. The power supply can be programmed to any output voltage from 0V to 36V and any output load current from 0A to 100A with a change of its internal connection configuration. This power supply is designed for applications that require high voltage level programmability, such as LED retrofit. With a maximum operating temperature of 40°C and an ultra-short circuit protection feature, the P100AP-361 is a reliable power supply for your application.