ROBERTSHAW 19527 150/450F,24"TinZinc,OpenHiW/sw 5300-174.

SA-179-24 DIRECT ACTING COMMERCIAL

The Robertshaw 19527 Tin-Zinc Direct Acting Commercial Steam Humidifier Series is rated for Steam Output of 150 gpm and 450F. The model SA-179-24 provides a Full Flow Drain Option (water discharge will be to floor). The optional flow gauge allows you to accurately measure the steam output of your steam humidifier. The direct acting commercial steam humidifier is both US and Canada UL approved for use in all applications including commercial kitchens, food service, bathroom humidifiers and auto care.

The SA-179-24 is a direct-acting, compression style solenoid that offers two (2) normally open, non-slamming contacts. It has a 24" (61cm) Tin/Zinc coil with swivel load connector and 18 AWG leads. The coil is wound on a 18 ga/1.3 mm 2 aluminum alloy frame. Coil terminals are tinned copper. This SA-179-24 may be used for motor starter or heater control applications.

The Robertshaw SA179 direct acting commercial solenoid valve is a 24 volt, direct acting, normally open, pilot operated valve. It is designed for use on natural gas and bottled propane gas downstream of the demand regulator. It may also be used in commercial kitchens as a pressure relief device in conjunction with a downstream shutoff valve.

The ROBERTSHAW 150/450F,24"TinZinc,OpenHiW/sw 5300-174 is ideal for a variety of applications including furnaces, boilers, air conditioners and package heaters. The direct acting commercial thermostat has a Microprocessor technology. It also has an easy push pad design with interchangeable colored pads for flexibility in coding.

The ROBERTSHAW SA Series Stuckz Tin-Zinc is a direct acting, low pressure poppet valve designed for use in commercial and industrial applications that require higher flow rates. The SA Series offers excellent solids handling capabilities, fast response time and superior serviceability characteristics.

With the ROBERTSHAW 150/450F 24 inch COMMERCIAL OPEN HI/SWG, you'll get increased visibility with its open hub design. In addition, it comes with a tin-zinc finish for superior corrosion resistance, ensuring that it withstands heavy duty industrial use.

The 191 Series (1/4"NPT) and 201 Series (1/2"NPT) offer the widest selection of commercial-grade manual valve actuators in the industry. Available in 1/4" or 1/2" triplex in natural, black or zinc plated bodies with one to six ports as well as two large bore sizes in a variety of configurations for top- and bottom-connect installations.