Nordyne 276967 626404R 145F Double Pole Limit Switch

145F Double Pole Limit Switch

The 145F Double Pole Limit Switch is interchangeable with the following: 276967 626404R

The 145F Double Pole Limit Switch has been discontinued by the manufacturer. You may still find it at some of our distributors.

Introducing the 626404R 145F Double Pole Limit Switch, manufactured by Nordyne. This limit switch is designed for use in an industrial setting to control a double pole field device such as a pump and is rated at up to 600 Volts at 10 amps. Powered by Solid State technology, this unit comes with 4 screw terminal blocks that allow you to easily connect the field wires and power source wires, eliminating the need for crimping. This limit switch also comes with an optional terminal screw cover

If you want a limit switch that is as dependable as it is dependable, then the 276967 626404R 145F Double Pole Limit Switch by Nordyne might be the one for you. Why? These are industrial switches made for your commercial heavy duty application. That's why they are designed to have plastic contact points manufactured to withstand constant movement of a load without premature wear. And they can be installed on single phase motors and commercial rack and pinion drives.

When used as the primary limit switch, with circuit power off, manually rotate the housing, setting the switches to one side. When circuit power is turned on, the limit switch should remain on the side you set it to. If not, then reverse the switch until it remains in place when circuit power is on. ``( From ) Nordyne 276967 626404R 145F Double Pole Limit Switch

The 6264000R Series Limit Switches feature E-Z LOK? terminal blocks and are available in toggle or pushbutton configurations. The switches are available with a normally open (NO) or normally closed (NC) set screw terminals that accept up to 14 AWG wire. The 143 Series Limit Switches have 3/8 in NPT threaded inlet connections and a no flow thermoplastic drain cup in liquid-tight housing. Nordyne 276967 626404R 145F

The Nordyne double pole limit switch is a 6264 series, AC or DC motor limit switch. This switch fits directly onto the C-Frame of the heating element.