NORDYNE 626508R 626508R L250-40 LIMIT c L250-40 LIMIT c

210-250F AUTO Limit Switch

NORDYNE 626508R 626508R L250-40 LIMIT c L250-40 LIMIT c *** 210-250F AUTO Limit Switch

This is a NORDYNE L250-40 LIMIT c - 210-250F AUTO Limit Switch Part Number: 626508R This is a replacement part. It is not made by the original manufacturer of the machine.

Auto Adjusting Limit Switch 210-250F, Auto Adjusting Limit Switch 210-250F This is a switch that contains an internal spring return mechanism and comes with a two pin connector already attached.

Have you ever pushed the ON button on a driver, only to have it rapidly reach its limit and shut off? Most of us have. To prevent this from happening, our auto limit switches are designed to help prolong the life of your driver by cutting off the power automatically when maximum capacity is reached. Operating temps: -50F to 225F Contact resistance: .005 ohms Max voltage: 1400V at rated current Capacitance: 6 microfarad Insulation resistance: .001Meg

This rugged limit switch is made of cast aluminum with a stainless steel case. A convection cooling fan is provided to reduce thermal sensitivity and operate over a wide speed range; the photosensor has a large sensing area which reduces the effect of end face reflection. A delay time function eliminates false triggering due to rapid change in temperature. The terminal block allows for easy wiring.

The six plug in limit switches are constantly controlled by their own N.C. and the either their N.O. or N.C.. They can be used for voltage protection, over or under temperature protection, speed control of conveyances, and much more. Three ways to view the Status of Control The LIMIT c has its own light that comes on when either the device is tripped or when it is energized. This light will also come on when the push on/push off switch

The NORDYNE 626508R L250-40 LIMIT c Limit Switch is designed for use in a variety of power-limited applications. The unit has a NEMA 1 (IP65) design and a switching element that is solid state and enclosed within an metal housing. The travel is limited by a threaded bushing which may be adjusted to set the throw distance. The switch has 1/4" thick flat contacts that are rated at 10 amps with 200 VAC/VDC