Nordyne 277119 632447R "0.85""WC STSP PRESSURE SWITCH"

"0.85""WC STSP PRESSURE SWITCH"

The Weber 632447R 0.85" WC STSP Pressure Switch is designed to be installed in the suction line of a dishwasher and controls the water circulation. The switch is located at the bottom of the unit so if you need to test it, use of an extra long alligator clip or wire may be needed. The switch must be mounted on a firm base and it cannot be disconnected from its power source. This part can be found at ApplianceConnection.com, where you

The STSP Pressure Switch is used to turn a pump, fan, valve or other device ON/OFF according to a preset differential pressure. The STSP Pressure Switch fits onto any 1/2" NPT pipe.This compact, highly rugged device features all plastic construction, a chemical and moisture resistant stainless steel seal and stainless steel electrodes.

NORDYNE PRESSURE SWITCH 0.85IN. W.C. Series: C22B0, 0.85", 10/2TC, 1/2" NPTWATER-COOLED CHASSIS CODE: 632447R Mounting Type: Standard Mounting Type, Mounting Depth: 1-1/2 in (38 mm) Pressure Range (wc): .85

The Nordyne 277119 0.85" X 4.00" Pressure Switch, The Nordyne 277119 0.85" X 4.00" Pressure Switch is an accessory part for the following gas furnaces: D3PNC4010SRHC, D3PNC4010SRJC, F3PNC4010SRHC, F3PNC4010SRJC, F3PNC5015SRHC, F3PNC5015SRJC.

Nordyne 277119 632447R "0.85

_Description_ The Nordyne 0.85

The North America brand of Nordyne Pressure Switches that are used for single and dual stage steam pressure applications. This pressure switch is normally closed, normally open (N/C and N/O), double throw, two position safety selector switches with rod end actuated valve positioners. Pressure switches must be mounted in a horizontal position in a dry location.