Nordyne 277134 PRESSURE SWITCH -1.50 PRESSURE SWITCH -1.50

PRESSURE SWITCH -1.50

277134 PRESSURE SWITCH -1.50

nordyne 277134 PRESSURE SWITCH -1.50 A pressure switch operates a device, such as a water heater, that needs to be powered only when in use. A pair of contacts on the switch opening and closing when the right amount of pressure is detected on a gas supply line. This works well for devices which use very little power like outdoor propane heaters; they only need enough power to fire up the gas burner. It also can be used in combination with a thermost

The Nordyne 6700 Pressure Switch is designed to keep the blower motor ON if the air pressure is below the set point. It is sold with a 1.5 PSI set point, and should be used when a blower motor is connected to the system. ''

The 277134 Pressure Switch is a replacement part for the following Nordyne Heaters: 036Z00-036, 046Z00-046, 046Z01-046

Our 277134 pressure switch is used on Nordyne's direct fired outdoor heaters. The 277134 is a 1/2" restriction and has a minimum pressure of 150 PSI and maximum pressure of 300 PSI. This is a 1/2" pressure switch that requires 24VDC orVAC current. This 277134 is made of Viton and an aluminum diaphragm.

For replacement of older exhaust fan pressure switches in residential, commercial and industrial applications. The NEOPRENE (4.0 x 12.5) pressure switch provides reliable service for either high or low temperature heating systems. Features Easy installation

The NSS1-2-M10 is a pressure switch designed to sense the gas pressure and regulate the burner valve opening automatically. It could be used for both automatic and manual ignition on 1+1, 2+1, 2+2 burners of municipal gas and natural gas.