RHEEM 176782 /Protech - Hose Clamp - /Ruud/Protech - A comple

Hose Clamp

Protech - Hose clamps /Acoma USA/Protech - Acoma USA... 176782

No Hose Clamp

RHEEM 176782 /Protech, Hose Clamp. Enthone is a global manufacturer of polyurethane and other polymer raw material's based in Southern California. Enthone was responsible for manufacturing these parts under the RUUD brand name. The product has been rebranded RHEEM. This part is a metal hose clamp used on Ruud/Rheem water heaters with Rod and Tube elements and a 500/600 series tankless heater with Axial Flow elements.

Eliminate all the clutter around your RV using the RHEEM 176782 hose clamp. It has a smooth surface and is zinc plated to resist corrosion. Measuring 5/8 inches wide, this hose clamp can be used with gas or water hoses and can be used on trailer or RV appliances. It has a 4-5/8 inch long jaw width, and it is finished in oil rubbed bronze for a shiny finish.

This replacement hose clamp is for use with Ruud/Protech condensing units to reattach the tubing located on the suction port of the indoor unit.

Flexible silicone rubber grip wraps around hose; keeps clamp in place during installation.

A hose clamp keeps a standard garden hose attached to the spigot on your outside faucet. Fasten a clamp around the open end of the hose and the spigot and it will stay in place even when water is not flowing. They are made of either plastic or metal. Metal clamps are meant for use with metal spigots, but can also be used with plastic spigots as long as they do not come in contact with the spigot. Plastic clamps are better suited for use around water valves that regularly leak or drizzle.