ROBERTSHAW 17607 Gas Heating Valve - 1/2 Inlet, Hi-Lo Pressure Regulator 1.7 - 3.5 Nat.

1/2" X 3/8" MILLIVOLT LOW PROFILE G

This valve is designed to work in conjunction with a specific model burner valve with low-profile 1/2" x 3/8" millivolt gas connections. The Hi-lo Pressure Regulator will control the burner pressure up to 3.5 National PSI.

Control the pressure of your propane gas grill with this 1/2 in. X 3/8 in. millivolt low profile anti-corrosion valve from Robertshaw. It allows you to regulate the gas to your grill at a range of 1.7 to 3.5 pounds per square inch (psi). Compatible with many popular brands of gas grills, it's easy to install.

The 17607 LHV Thermostatic Gas Valve from Robertshaw. 3/8 inlet for low profile installations. 1/2" FNPT adjustable pressure regulator accepts any gas pressure from 1.7 to 3.5 PSI static, 4.0 PSI short term peak. Millivolt outputs can be used with gas or electric heating system.

A 3/8" millivolt low-pressure regulator with Hi-Lo adjustment up to 3.5 psi and Lo-Hi adjustment down to 1.7 psi for natural gas (NG) or propane (LP), providing thermostatic control between a minimum and maximum temperature. The 17607 is designed for furnaces where an air flow switch is required or nominal pressure is available between 18 to 70 psig. Connections include 1/2 inch NPT female input, 3/8 inch NPT male output with gauge port, and thermocouple (TC) connection.

Attach the gas heating valve to your piping and then turn on the power. The heat is distributed throughout your house. This product replaces any previously installed 1/2 IN x 3/8 IN valve, allowing you to use the existing gas piping. This product is UL Listed and CSA Certified for your safety.

The R-17607 gas heating valve is ideal for VAV rooftop air conditioning systems. The unit features a hi-lo pressure regulator with operating pressures of 1.7 to 3.5 psi and connections of 1/2" X 3/8". This valve comes in two models including one with a manual reset (R-17607MVP) and one with an automatic reset (R-17607AVP). The units are designed for use with nontoxic refrigerants and are for use on R100, R12, and low ozone depleting hydrocarbon refrigerants only.

The 17607 Gas Heating Valve is part of the Smart System Pro line of heating components and connects into a heating system. It measures 4-3/4" x 1-5/8" X 1-1/2" and has three ports.