MAID O' MIST 75 75 AUTO-VENT, 1/2" FEM IPS X 3/4" MALE AUTO-VENT, 1/2" FEM IPS X 3/4" MALE

AUTO-VENT, 1/2" FEM IPS X 3/4" MALE

MAID 'O MIST 75 is an AUTO-VENT, 1/2" FEM IPS X 3/4" MALE on a MAID 'O MIST 75 HYDRAULIC BRAKE; connects directly to fuel tank of truck with 1/2" FEM pipe thread (nipple) fitting; stops fuel from entering hydraulic system.

The MAID-O-MIST 75 is a air handling device used in cluster heating, air conditioning, and ventilating systems. It consists of a 2-way normally closed diaphragm valve designed to operate in positive air applications with pressures up to 100 PSI. The MAID-O-MIST 75 75 is rated at 5 SCFM at 80 PSI and powered by 560 CFM electrically operated blowers. AUTO-VENT, 1/2" FEM IPS X 3/4" MALE

Swivel-Connect at BOTH ends, Female at one end and Male at the other with check valves in both. Male End is 3/4" pipe thread, female end is 1/2" NPSM IPS connection.

The MAID O' MIST is a brass auto water diverting nozzle with removable, rotating flow control pin for use in non-pressurized gravity and pressure (gravity feed) applications. Bucket capacity is 5600 gph which will fill approximately 16 tubs or 14 above-ground swimming pools per hour.

MAID O' MIST 75 is a MAID O' MIST product designed for the venting needs of home and light commercial humidifiers.

For water recycling and filtration systems for air conditioning, pool and fish pond, air vent from the pool pump or hot tub to a debris filter. Clearly marked for easy identification and assembly.

The MAID-O-MIST 75 has 4 inlet ports and 4 outlet ports. This selection gives the installer a variety of options to route the inlets to the outlets for different roofing conditions.