WHITE-RODGERS 113650 White-Rodgers Hot Surface Ignitor Mini with 7.5" Leads

120V HOT SURFACE MINI IGNITOR WITH

The White-Rodgers 120V BTU Hot Surface Mini Ignitor is great for replacing and upgrading gas and electric coil pilot devices. It works with all brands and types of system control. The mini ignitor can be used to replace pilot burners, and requires no electrical connection to the heater burner or pressure switch. It fits square 1/2" inlet ports. It comes complete with 6 ft low voltage wires, 2 connectors, mounting bracket, gas supply line and a test button.

White-Rodgers has been manufacturing products that make life easier for homeowners since 1914, and we are sure you are going to be satisfied with the quality and performance of your new mini hot surface ignitor. This unit comes fully assembled with 7.5-in leads. It is designed to work with gas furnaces only if used in a 120V controlled power and is UL listed for safety. It also stays cool to the touch, even after long periods of operation, so there's no need to worry about being burned when installing it.

WHITE-RODGERS 113650 - WHITE-RODGERS hot surface ignitor mini with 7.5" leads, type: OE (18 - 30V), 90 days warranty. Free Same Day Shipping!

Facing a frozen plug with only a corroded, out of specification hot surface ignitor to blame? We’ve got the replacement part that you need. It’s a Mini Hot Surface Ignitor with 7 1/2" leads that will save time and money. Replace all the interior components of White-Rodgers style GMD36, including both the ignitor and the reed switch. And just because it’s an import doesn’t mean that it’s impossible to install. You just need basic wiring knowledge and 10 minutes of time.

White-Rodgers™ Hot Surface Ignitor with 7.5" leads. Direct Wire #113650. 24 VAC/5 VA, 200 mA. 4.0-19.0 ohms. 0200106718

WHITE-RODGERS Item Number: 113650 Hot surface ignitor with 7.5" leads for use on gas logs, fireplaces, or other applications requiring a hot surface igniter.

Miniature thermal hot surface ignitor for 5/8 and smaller diameter gas orifices. Designed for direct wiring to the mounting studs or top hat. For gas air systems. Instant illumination on hold down, for positive flame control. Typical uses include: pilot lights, kitchen ranges and ovens, fireplace equipment, water pumps and generators, industrial process heating equipment, gasoline dispensing units; solar heating equipment; home heating and ventilation equipment. Ignitor terminals are easily accessed for 120V single terminal operation using 900T1-WRT connector (not included).