77707-0086 VENT KIT MSTRTMP-HEAT FABVENT FOR HEAT FABVENTING

VENT KIT MSTRTMP-HEAT FABVENT

Vent Kit MSTRTMP-HEAT FABVENT is installed between the dryer and the wall to complete a venting system. It is used as the final component of a sealed venting system and must be connected to the section of continuous venting pipe at the area of installation. Two insulated flexible metal 15 in. drain hose (Fig. 1).

Aqua One's United Aqua Group 77707-0086 Vent Kit MSTRTMP-HEAT FABVENT for Heat FabVenting keeps your aquarium water circulating at the ideal temperature. Aqua One recommends this vent kit for all Aqua One Aquariums from 1.5 Gallon to 45 Gallon size and Power Filters of all brands. Adjustable Air Flow permits minimum or maximum air exchange in the aquarium.

Hydronic-Heat FabVent includes one Hydronic-Heat Vent Kit, two 4 inch diameter x 9 inch long 3 ply insulation sheets, and a 29.5 inch long clamp to secure the Heat FabVent to your warm air supply duct. The MSTRTMP-HEAT (Medium Size Thermostatic with Heat) contains an internal thermostat that automatically turns your hydronic heating system on when the hydronic room temperature is too cold and off when the thermostat has reached its set point.

The Aqua Group 77707-0086 is compatible with Aqua-Hot models MSTRTMP and LSSTRTMP, and works to gently force heat out of the plumbing lines. This vent kit is a suitable option for those who wish to vent their heaters properly.

The Aqua Vent-Heat Fabric Vent is made of a 1-ply fabric, heat activated thermoplastic adhesive and a 2-ply fabric tape carrier. The product is available in one colour only, White. It comes packaged on a 15m roll with a white release liner applied to the face of the product tape. The liner must be completely removed before applying the product.

An alternative to the existing vent kit, which requires additional fabrication. This vent kit is a free standing unit and comes with a check valve for backflow prevention. The collar can be used on a 1-1/2" pipe or installed directly onto our Gable Inserts.

This kit fits most standard top mount heaters. It comprises two sections, one to vent out from the heater and one to vent into the room. The system is designed to prevent any condensation from forming in the rooms heated by a vented heater...