ASCO 77086 -120/60,110/50 Brass Body Pilot Operated General Service Solenoid Valve, 1-1/2" Pipe Size, 2-Way Normally Closed, Nitrile Butylene Sealing, 1-1/4" Orifice, 22.5 Cv Flow, 120V/60 Hz, 110V/

24/DC 20137

Solenoid Valve  Description:  The ASCO 77086 is a pilot operated, general service, normally closed solenoid valve designed to allow fluid flow when the solenoid energizes. This valve is ideal for many applications including irrigation, fire protection and other industrial process control. The 70786 features a brass body, with Viton® BHB® seal and nitrile butylene diaphragm.

The ASCO 77086 -120/60,110/50 Brass Body Pilot Operated General Service Solenoid Valve is a pilot operated, normally closed valve with an electro-pneumatic control. The valves are commercial duty and meet the requirements for commercial, industrial and process applications. They offer many features not found in other solenoid valves including a quarter turn manual override capability to prevent damage to the solenoid during emergency shutdown conditions.

The ASCO 77086-120/60/110-50 is a brass body pilot operated general service solenoid valve, 1-1/2" pipe size, 2-way normally closed. It is designed to control flow in one direction under power and the other path by pilot or hand. The valve has NBR Buna seals with Nitrile Butylene Sealing for use with acid, alkali and salt solutions. Brass body may be used in water, steam, oil and non corrosive gases up to 350°F (177°C).

This is a powerful and sturdy solenoid valve that provides fast flow rates and high PSI. It is made of brass and built to withstand harsh conditions. This valve also comes with a dual voltage rating, allowing it to be used with either 110V or 120V electrical systems, making it ideal for use in many different types of commercial settings. The 1-1/4" orifice allows for maximum water flow rates.

The ASCO 77086 - 120/60,110/50 Brass Body Pilot Operated General Service Solenoid Valve, 1-1/2" Pipe Size, 2-Way Normally Closed, Nitrile Butylene Sealing is a good product. Asco is leading the industry in valve technology and innovation. They are constantly striving to improve the quality of their products and increase efficiency for the customer. Their products are known for reliability and durability. The ASCO 77086 - 120/60,110/50 Brass Body Pilot Operated General Service Solenoid Valve is one of their most popular solenoid valves.

This ASCO 77086 -120/60,110/50 Brass Body Pilot Operated General Service Solenoid Valve, 1-1/2" Pipe Size, 2-Way Normally Closed, Nitrile Butylene Sealing, 1-1/4" Orifice, 22.5 Cv Flow, 120V/60 Hz, 110V/50Hz Valve is a pilot actuated valve. It has a normally closed function. The valve is made up of brass body and has ceramic disc as the blocking element. This product works with 12 volts DC power supply.

This ASCO 77086 -120/60,110/50 Brass Body Pilot Operated General Service Solenoid Valve, 1-1/2" Pipe Size, 2-Way Normally Closed, Nitrile Butylene Sealing, 1-1/4" Orifice, 22.5 Cv Flow, 120V/60 Hz, 110V/50 Hz is a good product. You can read the details of this product below.

Pilot Operated General Service Solenoid Valve, 1-1/2" Pipe Size, 2-Way Normally Closed, Nitrile Butylene Sealing, 1-1/4" Orifice, 22.5 Cv Flow, 120V/60 Hz.

Solenoid Valves – A Solenoid valve is a valve that uses an electromagnet to control the opening and closing of a valve. The purpose of a solenoid valve is to control the flow of fluid or gas between two separate locations.

The pilot operated ASCO 77086 -120/60,110/50 Brass Body General Service Solenoid Valve is a two-way normally closed, normally open or single shot pilot operated solenoid valve for on/off control of small diameter liquids and gases. The valve accepts a 1-1/4" (31.7mm) needle valve discharge from the pilot. The low force required to close the valve makes it ideal for applications where precise flow control is not required or where an integral or remote pilot must provide greater than normal force to close the valve.