24/DC 1-1/4" N.C., GAS SHUTOFF SOLENOID VALVE, WAT
When considering the right shutoff solenoid for your application, it is important to select one with features designed to cope with the specific pressures and flow rates found at your site. The 24/DC 1-1/4" N.C., GAS SHUTOFF SOLENOID VALVE, WAT from ASCO Flow Control contains features well-suited for a variety of industries ranging from mining to meat packing applications
The ASCO 292128 24/DC 1-1/4" N.C., GAS SHUTOFF SOLENOID VALVE, WAT is a direct replacement part for some models of gas fireplaces, stoves and heaters.
The ASCO model 292128 24/DC 1-1/4" N.C., GAS SHUTOFF SOLENOID VALVE, WAT 322431 operates on 115V and a maximum of 5.6 amps. This 24 VAC Solenoid Valve weighs approximately 11 pounds. The size is typically used for home improvement projects or in industrial applications.
The Gas Shutoff Solenoid Valve 24/DC 1-1/4", GAS from ASCO is a solid state single pole, single throw switch that will normally open upon energization. This ASME valve is designed for use in residential natural gas applications.
The ASCO 1-1/4" NC Gas Shutoff Solenoid Valve has a 1-1/4" inch NPT inlet and outlet. It has an operating pressure rating of 125 psi and it is used for gas shutoff service.
The ASCO Series 29 solenoid valves, N.C. gas shutoff, is designed to be used with noncorrosive gases for on/off gas control and pneumatic control with a low-voltage power supply. It provides positive shutoff and low fail open input, and can be installed in any position. The solenoid coil is field wound and is equipped with an internal voltage regulator that limits coil charge to 5 volts to assure long life operation. Solenoids are an inexpensive method of actuating large industrial valves or on/off control for gas dampers, blowers, fans,
A gas shutoff solenoid valve for on/off service in industrial waterworks. The valve has an aluminum body with pot metal lever, push-on inlet and outlet connections, and a 0-150 psi pressure range. This item ships with no flow control.