ASCO 278275 120VAC 1/8" NPT. 2-WAY N.C. #2 FUEL OIL SOLENOID V

120VAC 1/8" NPT. 2-WAY N.C. #2 FUEL OIL SOLENOID V

ASCO 278275 120VAC 1/8" NPT. 2-WAY N.C.

The ASCO #2 solenoid valve is a two-way, normally closed, pneumatic control device used to control the flow of fuel oil to fuel oil furnaces, boilers and auxiliary burners. The #2 solenoid valve is constructed of brass with a 3-wire connection. The body has an evaporative disc for heat protection. The valve has a stainless steel spring and spindle assembly for durability. The unit is rated for fuel oil service (1/8" NPT) at 120 volts AC voltage and the spindle requires 3 watts at 12 amps DC current.

This fuel oil solenoid valve is constructed of brass and stainless steel with a bronze body inlet and outlet. Spring return to open and close. Available from MetroPac.

Does this product possess any special qualities? It’s a fuel oil solenoid valve.

The ASCO Solenoid Valve is designed in accordance with the ANSI Z21.60-1968 standard. It is designed to operate at 120VAC and 1/8" NPT (nominal) connection type. This valve has 2-way non-changeover position and a N.C. (normally closed) coil configuration. This valve is a normally closed 2 way solenoid valve rated to 125 PSI at a working pressure of 150 PSI or higher.

This ASCO 278275 120VAC 1/8" NPT. 2-WAY N.C. #2 FUEL OIL SOLENOID VALVE is a 120VAC 1/8" NPT. 2-WAY N.C. #2 FUEL OIL SOLENOID VALVE product manufactured by MetroPac in New York, NY (USA).

3A 120VAC 1/8" NPT. 2-WAY N.C.

This ASCO 278275 120VAC 1/8" NPT. 2-WAY N.C. #2 FUEL OIL SOLENOID VALVE is a non-lubricated, solid state, normally closed (N.C.) relay with maximum full load current of 2 amp at 120 VAC/60Hz with Class B insulation and contacts rated at 12VDC @ 0.2A resistive and 0.5A inductive, 5VDC @ 1A resistive and 1A inductive, 30mA @ minimum voltage of open contact voltage to 15VDC maximum rated voltage of contactor coil.

ASCO - 278275 120VAC 1/8" NPT. 2-WAY N.C. #2 FUEL OIL SOLENOID VALVE, 1PSI  #2 Fuel Oil Solenoid Valve, 120VAC, 2-Way Normally Closed, #2 ANSI Flange Size Inline Connection (1/4" Male Pipe to 2-Way Female Pipe), 1 psi Maximum Pressure Limit (Flow Rate), ANSI No.

Description: 120VAC 1/8" NPT. 2-WAY N.C.