WHITE-RODGERS 14394 " TRANSFORMER, ENGRY LMT FOOT MT PRI:120V SEC:24V 40VA 50/60HZ 1.67A IO".

40VA, 50/60 Hz, 120V pri., 24V sec.

The WHITE-RODGERS 14394 is a 40VA, 50/60 Hz. 120V pri., 24V sec. transformer, AC rated for indoor use only.

This listing is for a WHITE-RODGERS 14394 TRANSFORMER, ENGRY LMT FOOT MT PRI:120V SEC:24V 40VA 50/60HZ 1.67A

The White-Rodgers 14394 " Transformer, Energy Limiting Foot Mt. Pri: 120V Sec: 24V 40VA 50/60Hz 1.67A I" from a trusted brand in home comfort offers dependable performance in your household with the comfort you need for the living room, dining room, kitchen, office or any other area that you want to have comfortable.

The white-rodgers 14394 transformer is an air-cooled, dry type with thermally protected winding for use in refrigeration and air conditioning equipment. It is suitable for use with a single phase, 2 wire system. The 120 volt primary power rating is smaller than a standard transformer and may be used in some applications where standard transformers are too large. The additional 24 volts secondary power rating is less than half the normal rated output of a 1:1 transformer giving it approximately half the power dissipation as a 1:1 transformer (40VA vs 80VA). This "low voltage" secondary rating is intended to

The 14394 high voltage transformer is a double-phase device that converts 120 volt primary electric power into rectangular wave electrical current of 24 volt second. It is for use in temperature compensated, timed overcurrent, and load control applications. Also for use with the SP-1 and SP-2 programmable control systems on model 8800 AODD relays.

The White-Rodgers 1.67 amp transformer is a standard product that is compatible with the following thermostat/power sensor models: Transformer, 4 wire, Jr., max. heat transfer 1600 sq. ft., max. loading 400A, base type T8B, sec. size 2" X 3-1/2", installed height 4-9/16", Weight 6 lbs. 14 oz., Overall dimenstions 11-1/4" L x 7" W x 7-5/8" H

The "Transformers" series of products are ideal for residential and light commercial applications. They are used by electricians who install each unit directly to the loadcenter with proper overcurrent protection, a fused disconnect or circuit breaker and meter combination as required by local code.