CNV KIT NAT TO LP F,B/E130-250
Enables an operator to operate the generator at LP gas with the use of an LP conversion kit. A hand held CNV monitor is required when fueling with LP gas. $7,900.00
This kit provides the most popular features of our Compact No-Voltage (CNV) System for use with non-halogenated flammables and liquids. Includes: Two REZNOR 8050N Pumps, 100A Digital Displays (PIL-12 Feeding and Pump Display), Antistatic Cartridge, Blackhawk Disconnects, Magenta Battery Pack with 75 ft. Cable, Fill Check Valve, Flow Restrictor for 150 PSI Flammables Only*,
The optional kit converts from Natural Gas to liquid propane fuel. The kit includes one gas regulator and two propane shut off valves.
Designed for natural to LP-gauge conversion, this kit is complete with all major components required to convert a natural to LP-gauge passenger car. It includes couplers and related hardware designed for cars built in the 1950's through the early 80's, as well as shims needed to correct for current rail car size and clearance differences.
C and B tanks commonly found on older forklifts have been re-engineered into our 99247 kit which will allow older machines to convert to LP fuel. This kit includes the fill and vent hoses, filler block, and a valve cover seal. Operation of this kit may require the removal of the lower half of the body and cab.
Converter kit for refrigerant oil to mineral oil This kit allows you to replace the R-134a refrigerant with R-12, R-22, or a blend of both. It enables you to connect the existing components of (2) R-134a systems to mineral oil, while also allowing for easy connection to existing refrigerant lines in future. Includes (2) 50' coil hoses and (1) 14' and one 115V solenoid valve, cap and tip
If you have a Reznor/Frigidaire 1.2 ton (1,2KW) filter-less split system that you want to convert to a Lennox 1.5 ton (1.5KW) parts included with this kit: LER254923 evaporator coil assembly LEC303422 33,000 BTU/hr LPF183625 18,250#050 outdoor unit LER769908 indoor air handling unit module LER3045