JOHNSON CONTROLS A19AAD-5C A19AAD-5C SPST REMOTE BULB TEMP. CONTROL NEMA

SPST REMOTE BULB TEMP. CONTROL NEMA

Cut your energy costs and save valuable time with the A19AAD-5C SPST REMOTE BULB TEMP. CONTROL NEMA. It works on incandescent light bulbs to maximize energy savings, while keeping your existing incandescent bulbs you already have. Designed to work with your existing incandescent light bulb, this remote on/off switch is not compatible with halogen bulbs. With a compact size, this device is easy to use and makes it convenient to adjust the temperature of the room whenever you want.

The A19AAD-5C A19AAD-5C SPST REMOTE BULB TEMP. CONTROL NEMA has a spst (single pole single throw) slide switch that is used to switch on/off the device it controls; in this case, a lamp or heat lamp. While some Slide Switch Switches can be used for controlling an existing light source, like an appliance like an air conditioner or refrigerator, most are designed for use with new electrical fixtures with no wiring.

The Johnson Controls A19AAD-5C A19AAD-5C SPST REMOTE BULB TEMP. CONTROL NEMA 10 has three terminals and is used to control lighting loads where a variable ON/OFF fluorescent lamp load is desired, such as in retail displays, supermarkets, office buildings, etc. The power supply circuit can be connected directly (or fused) in line with the supply circuit to maintain power even when the remote pilot is off.

This SPST (single pole switch, single throw) Remote A19 Bulb Temp. Control has a Variable Adjustment, and is designed for use with single directional lamp load of 100-130 Volts. With Screw Terminals, and White body material; this Bulb NEMA is ideal for Residential and Commercial applications such as Ceiling Fixtures, Floor Lamps, Water Filtration Systems, RVs and more. Each order includes one (1) A19 5C Speed Switch NEMA

The A19AAD-5C is a spst (single pole single throw) non-illuminated SPST control for lamp and ballasts with 5/8" Screw terminals. It has a BAYONET socket and a push-in style pushbutton switch.

The A19AAD-5C temperature control is a one way convector with an external 24 VDC Relay/Contactor. It has a built-in two-stage power current limit with a maximum of 2.0 Amps. The device has an operating frequency up to 2 KHz. The temperature control is designed for outdoor use and conforms to UL Standard 60950-1"

Protect and monitor lamps and HID ballasts from no-load to rated current and voltage. Use with Solid State drivers and relays for improved drive and power-factor performance. FEATURES: NEMA 4 enclosure; 5 foot; 10/3 SJT cord; 1/4 in. terminals; 40~275VAC; Two position slide switch allows remote cycling of lamp(s) on and off, Monitor only feature allows the user to monitor lamps at any time regardless of switch position, Uses solid state drivers to control lamp loads.

Control the temperature of a remote light fixture from up to 200 feet with this innovative thermal fuse switch. This kit is designed for use with a 19 watt incandescent A19 bulb and a 120-volt outlet, and comes with a 5-foot lead wire, two connecting wires, and all necessary hardware for an easy installation.

Our miniature light dimmer switch, A19AAD-5C, uses less than 0.5 Watts to control light bulbs up to 100 Watts. This SPDT (single pole double throw) On-Off-On switch fits into the standard one gang electrical box and replaces most toggle switches found in older homes. It can also operate multiple devices within one box for use in existing wiring. This dimmer switch operates on 12 to 14-volt DC power sources and includes screws for attachment to the bulb socket cap.

The Model A19AAD-5C is a compact reflector lamp electronic reflector spot heater that has an adjustable thermostatic dial to allow for accurate temperature control of the bulb. With built-in control, this heater may be used to replace halogen bulbs with lower wattages to reduce energy costs. Turn it on and the soft touch manual override switch remains off until you turn it on.

The A19AAD-5C is a compact, solid-state, push-button remote triac solid state replacement for 24VAC, 40 watt incandescent bulb used as a room light control. It uses an external photocell to sense the presence of light and automatically turns the lamp on at dusk and off at dawn

Reliable and cost effective systems for controlling one or two lamps from a single-button remote location. The controls feature 11/16 in. Decora® style wall plates and work with most types of lighting fixtures.