JOHNSON CONTROLS A19ADB-2C A19ADB-2C DIRECT IMMERSION TEMPERATURE CONTRO

DIRECT IMMERSION TEMPERATURE CONTRO

This listing is for a Johnson Controls A19ADB-2C. This is a direct immersion temperature controller that is in good working order and appears to have been little used.

Chromalox's direct immersion temperature controllers offer the most comprehensive range of features in the industry today. The PTCR series includes a full array of controls that will fit into a variety of applications. With this control is an on/off switch, which allows the user to choose how many days worth of heat are used per day. The PTCR is UL/CUL and CSA certified.

The A19ADB-2C is a direct immersion design, thermostatically controlled immersion temperature controller that provides user selectable setpoints from 73°F (23°C) to 189°F (88°C) in 0.5° increments. Refer to NEMA Controller Selection Guide for additional information pertaining to direct immersion controller selection.

The Johnson Controls A19ADB-2C direct immersion temperature controller is designed to control the temperature of a pool or spa heater. It features an adjustable temperature dial, manual reset and auto reset for added protection, and includes a 25' cord with an 8' 18/3 SJT power cord and wiring diagram. This Johnson Controls product is warranteed for one year against defects in material and manufacturing.

The Johnson Controls A19ADB-2C is a 1/2 hp direct immersion temperature control. The Direct Immersion design provides maximum thermal efficiency when used with integral base and isolation mounting, and can be installed in a pit or tank.

A dependable immersion thermostat that withstands the harsh temperature changes associated with pottery firing. A19ADB-2C can be used as a temperature controller for kilns with an operating range from 2300 to 4851 degrees R.

The A19ADB-2C is a 230 V AC, Solid state thermopile temperature controller alarm. The A19ADB-2C can switch to alarm an appropriate load to protect it from overheating and is suitable for use up to 165 °C (329 °F). The controller can be configured with either an input or output for the high limit, and either an input or output for the low limit. When configured as an input, the high limit and/or low limit functions may be disabled independently.