Johnson Controls M9210AGC-3 ACT 24VAC AUX SW

ACT 24VAC AUX SW

Johnson Controls M9210AGC-3 ACT 24VAC AUX SW Johnson Controls M9210AGC-3 ACT 24VAC AUX SW

A Johnson Controls® M9210AGC-3 circuit breaker is located in the Auxiliary Switches panel of your rear A/C unit. This circuit breaker controls the flow of power to the auxiliary switch.

M9210AGC-3 ACT 24VAC AUX SW

The Johnson Controls ACT 24VAC AUX SW is a Johnson Controls brand. The SWITCH, 3 POSITION, FLUSH MOUNT AUXILARY makes it easy to connect and disconnect the motor circuit. It's typically used in HVAC systems.

This Johnson Controls M9210AGC-3 ACT 24VAC AUX SW is a safety switch and comes with auxiliary contact in factory-installed main contact block. It is UL listed for 1/2 HP to 3 HP motors and is suitable for use as protection against overloads and short circuit applications.

Johnson Controls M9210AGC-3 ACT 24VAC AUX SW

The Johnson Controls M9210AGC-3 ACT 24VAC AUX SW features a compact design, has a top-bail handle, is constructed with plastic material, and the actuation type is push button. It also contains an auxiliary contacts and it has a voltage rating of 125/250 VAC. The Johnson Controls M9210AGC-3 ACT 24VAC AUX SW has a delay time of 2 seconds, can handle AC input voltages between 125 and 250 VAC, and the maximum switching capacity is 3A.

The Johnson Controls M9210AGC-3 ACT 24VAC AUX SW is a switch that is part of the Johnson Controls Metasys Network. The Johnson Controls M9210AGC-3 ACT 24VAC AUX SW can be configured as an Auxiliary Input to an existing module, or as a standalone switch. This switch requires either a local contact closure or fieldbus input to activate. It can be used in Commercial and Industrial applications, including low voltage lighting and HVAC systems.

The M9210AGC-3 is a Thermostat Control, designed to control air conditioners and heat pumps. The M9210AGC-3 can be used with 24VAC, 50/60Hz HVAC equipment which has a terminal voltage of 180 to 270 Vac (continuous). The contactor coil of the M9210AGC-3 is rated for 240 Vac continuous, 400 Vac surge.

The Johnson Controls M9210AGC-3 ACT 24VAC AUX SW features a compact rectangular design, which fits into a wider variety of panel cutouts. It is compatible with multi-voltage applications and offers switching of up to two loads up to 20 amps each. This auxiliary switch is designed specifically for heavy-duty commercial and industrial equipment.