Honeywell 280155 , Inc. AM100C1LF 80/120 1/2" HTG APPLICATIONS

1/2" NPT MIXING VALVE 70F TO 120F 3

Mixing Valve: 1/2" NPT mixing valve. Application: Suitable for residential & commercial applications. Temperature Range: 70F to 120F...

The Honeywell AM100C1LF-80/120 is a single stage mixing valve. Made up of brass material, the device has 280155, Inc. and AM100C1LF-80/120 on its body. The mixing valve has a P&T inlet, 1/2" NPT outlet, -80F to 120F temperature range and 80/120 AL/CF size.

The AM 100C1/L series 1/2" line mixing valve controls the water temperature of a single zone hot water system. It has a compact design, a temperature range of 70°F to 120°F (21°C to 49°C), and is field convertible without tools to operate on either a supply pressure of 35 psi (241 kPa) or 50 psi (345 kPa).

80/120 F. Permanent split capacitor & motor. 1/2" NPT, pneumatic pilot. Takes natural or LP gas. These models are for the home owner, or light occpuancy commercial applications such as a town house dryer with booster to main gas line. Note; Extended run requirements of the home owner will not be met with this type model, due to small sizing of draft orifice for 80 F. Use of an orifice reducer on all lines is reccomended when using this high heat gas for long periods of time over several days or weeks, such as; a hand

Honeywell's 80/120 mixing valve with 1/2" inlet and outlet will mix hot or chilled water with up to 80 gallons per minute. The Inc. mixers all have a built-in temperature limiting device to prevent scalding of the water supply, providing a constant hot or chilled flow water for shower systems and steam applications. All Inc. mixers carry an F rating, which indicates they are approved for use in mobile homes.

The Honeywell AM100C-1LF mixing valve is a two position, normally closed (NC) mixing valve used with water to air heat pumps, air to water heat pumps, and air conditioners. The majority of the applications using these valves will be 80/120 nominal systems. These valves are designed for horizontal installation on the suction line of the system, or in front of the coil unit within an all-in-one package. The support bracket is designed to provide a flange on which you can mount the valve.

With a thermal trip set point of 70°F, and an operating range of 32°F to 120°F (0°C to 50°C), you can use the Honeywell AM100C1LF-280155 mixing valve to bring water from a well, spring, pond or lake into your house. I