ASCO 235776 Power Technologies 1/2 BRZ SOL VLV NC 120/60

120/60 110/50 VAC 1/2" NPT. 2 WAY N.C. SOLENOID VA

Tested to ANSI/NFPA 99.12-2010 , this brass motorized valve is designed for 1/2” NPT and 120/60 voltage applications. The 1/2 BRZ SOL VLV NC features a two way normally closed operation, with minimal spool travel. It features a single pole, single throw (SPST-NO) configuration, and acts as a fail secure or fail safe release mechanism in the case of power failure or loss.

Case & Bushing, Tube, or Wiring Interval: 10 ft. Watts: 1/4 BRZ Model Number: 235776 Description: POWER TECHNIQUES 1/2" BRZ SOL VLV NC 120/60.

The 235776 Power Technologies 1/2 BRZ SOL VLV NC 120/60 is designed to keep the flow constant in your residential heating and cooling system. Control solenoids are an essential element of every Air Conditioning and Heating Controller. They connect with the thermostat switch and turn the valves on or off. Solenoids that are concentrated in certain parts of a building can regulate temperature control more efficiently. The 235776 Power Technologies 1/2 BRZ SOL VLV NC 120/60, like all products produced by this company, meets strict industry standards for quality and reliability.

The ASCO 1/2" NPT solenoid valve is used for controlling the flow of air, oil, water and other liquids at a variety of industrial applications. This solenoid can be used as the main control valve in small low flow system, or it can be used as a pilot control to direct greater flows of liquids under pressure.

The Power Technologies BRZ series solenoids are available with or without an integral coil. A combination of plastics and metal, this solenoid has a strong housing shell. It is a two-way normally closed (NC) solenoid. The coil is screw type and the plunger is spring loaded for reliable operation. These features create a dependable solenoid that can be used for many applications.

The BRZ solenoid valves are designed for water, steam and other non-corrosive liquids. They have a maximum pressure of 250 PSI / 17 Bar. Operating force 5 lb / 2.26 kg and minimum wiring for control is 12V DC. The valve body is nut jointed for easy assembly, no additional wrench is required to connect the pipe socket to the valve. It has a NC Valve and is used with manual, remote and automatic controls. The BRZ series valve replaces the discontinued CVS series valve step by step without any modifications in the installation or configuration of the actuator board or controller

The ASCO Solenoid Valve is a direct-acting, self-contained, two way solenoid valve designed for use with most pool and spa heating systems. The valve is suitable for saline and non-saline water and can be used for the supply or return lines. The ASCO Valve is constructed of corrosion resistant stainless steel to provide years of reliable use.