ASCO 8044A2CSA Power Technologies 1"M/R VLV.N/C 0/25#,FREE HNDLE

"1""M/R VLV.N/C 0/25#

ASCO 8210G56-24VDC "1.

A rugged, high quality power supply used to convert 120V ac to 24VDC. It has a 5 foot Power Cord with a NEMA 5-15R receptacle and two 4-40 mounting screws. For use in ASCO’s ION Series Ionizers; Model Numbers ION8210G56-24, ION8210G56-220 and ION8210G56-240.

The ASCO 8210G56-24VDC 1.5""NC is a test plug from Neuco Inc. The ASCO 8210G56-24VDC 1.5""NC is a good product. To learn more about the ASCO 8210G56-24VDC 1.5""NC, check out our products page or click on the other merchants shown and visit their site.

The "1.5""NC Asco 8210G56-24VDC is a low-pressure, two-stage positive displacement pump designed for reliable, continuous operation in severe service applications. The pump is powered by a 0.37 KW (0.5 HP) permanent magnetic motor and has a high efficiency design that delivers excellent performance at low operating speeds.

The directional valve comes in two versions, a normally closed (NC) and a normally open (NO) one. The NC valve is used for isolating the water flow to a device when it is turned off. The NO is used for switching the water flow on or off. Both utilize an internal diaphragm to accomplish this task. The actuator pressure of 5-40 psi [35-275 kPa] should be applied to either side of the internal diaphragm. This will cause it to expand and contract, which in turn opens or closes the ball check that allows flow through the valve's port.

Model ASCO 8210G56-24VDC Asco Part Number 8210G56-24VDC. This part is in our inventory and will ship same day when ordered by 2pm CST.

The ASCO 8210G56-24VDC "1.5""NC is an industrial grade contactor with a rated voltage of 24 VDC and a current rating of 56 Amps. The product was designed for use in low voltage, non explosive environments, and is UL/CSA listed.

The ASCO 8210G56-24VDC "1.5""NC is a high flow, diaphragm actuated, normally closed solenoid valve. It features a large 1.5"" NC male pipe thread inlet and outlet, along with heavy duty 12 gauge power leads and 20 AWG magnet wires. The ASCO 8210G56-24VDC "1.5""NC is used to control low pressure air or fluid to flow in only one direction using compressed air or nitrogen as the motive force.

This switch is used to turn on and off a load from 120 volt AC power. This switch has a single pole, single throw (SPST) contacts for normally open operation. The contacts are rated 15A at 250 VAC maximum and 10A at 125 VAC maximum. It features an aluminum enclosure that meets NEMA 1 standards.