ASCO 8210G7 Power Technologies 1/2" x 5/8" Solenoid Valve, Normally Closed

"1/2""N/C 5/300#

Valve is designed to take pilot operation. It can be used to control the application of water, steam, gas or oil. The device is not suitable for use with corrosive fluids, corrosive gasses or chemicals.

The V-120/60 Brass Body Pilot Operated General Service Solenoid Valve from Asco provides an economical pilot operated solution for all general service applications. This valve allows for remote control of general service applications such as domestic hot water, process liquids, air and gas services and fan control. Designed with a variety of options that have been tested to meet the most demanding application needs this valve is ideal for larger general service applications such as tank heaters, ejector pumps or booster fan control.

"ASCO 111106 V-120/60 Brass Body Pilot Operated General Service Solenoid Valve, 3/4" Pipe Size, 2-Way Normally Closed, Fluorocarbon Elastomer Sealing, 3/4" Orifice, 5 Cv Flow, 120V/60 Hz. Product - ASCO 111106 V-120/60 Brass Body Pilot Operated General Service Solenoid Valve, 3/4" Pipe Size, 2-Way Normally Closed, Fluorocarbon Elastomer Sealing, 3/4" Orifice, 5 Cv Flow...

General service solenoid valves are used in a wide range of commercial and industrial applications including domestic hot water, heating systems, air conditioning and refrigeration. Available with a variety of functions, pilot operated normally closed or normally open solenoid valves are intended for pilot duty only, requiring an external switch and supply power from 12V/24V/60VAC/DC.

The V-120/60 Brass Body Pilot Operated General Service Solenoid Valve is constructed of cast brass body and lever. This 2-way normally closed valve requires a pilot operated 24V/60VAC 1" NPT. The 3/4" pipe size allows this valve to be used on 3/4" liquid or gas conduit. A fluorocarbon elastomer sealing provides non-compression sealing for dry gases and liquids. The 5 CV Flow rating provides flow up to 5 cubic feet per minute at 60 PSI.

Asco 111106 V-120/60 Brass Body Pilot Operated General Service Solenoid Valve, 3/4" Pipe Size, 2-Way Normally Closed, Fluorocarbon Elastomer Sealing

This valve is often used in applications requiring quick and precise control over a process. It is ideal for general service applications where the flow can be interrupted and started at low pressures with the use of a pilot signal. The pilot signal may be from a standard or programmable logic controller from an automated system, or it could be from a hand-held pneumatic switch, dial indicator, pushbutton, etc...

ASCO 111106 V-120/60 Brass Body Pilot Operated General Service Solenoid Valve, 3/4" Pipe Size, 2-Way Normally Closed, Fluorocarbon Elastomer Sealing, 3/4" Orifice, 5 Cv Flow, 120V/60 Hz

These pilot operated solenoid valves are a part of ASCO's general purpose line of solid state, electric actuators. Asco's 111106 V-120/60 Brass Body Pilot Operated General Service Solenoid Valve, 3/4" Pipe Size, 2-Way Normally Closed, Fluorocarbon Elastomer Sealing, 3/4" Orifice, 5 Cv Flow, 120V/60 Hz is an electric valve designed to open and close automatically with the application of electrical power. It is equipped with 2-way normally closed contacts.