ASCO 8262H262-240V 1/4" N/O 0-160#Air145#Wtr 240V

1/4" N/O 0-160#Air145#Wtr 240V

Asco's patented X-Proof technology provides the highest level of liquid and contamination protection in the industry. The innovative design encapsulates an array of proprietary materials, including a special sealant, molded ABS housing and membrane, to ensure no liquid can penetrate the solenoid. The result is a solenoid that operates trouble-free for years with minimal maintenance. For more information on Asco, visit www.asco-eng.com .

X-PROOF solenoid valves can be found in a wide range of industrial and commercial settings, from small industrial systems to large utility-scale facilities. When it is necessary to transfer and contain materials that are highly corrosive, abrasive or solid, X-PROOF solenoid valves are used for reliable performance and long life.

With an ASCO EF8017G1 Power Technologies X-PROOF,PULL-TYPE SOLENOID Valve, you can be sure that your gas appliance will be completely protected from the elements. This ASCO EF8017G1 Power Technologies X-PROOF,PULL-TYPE SOLENOID Valve features a pressure guard and diaphragm to keep all gas and moisture out, whereas other products do not have this feature and can let water in. This results in preventing corrosion and oxidation that makes your products last longer.

The X-Proof line of solenoid valves are designed for pilot operated, normally closed, non-sparking, pneumatic directional control valves used in pneumatically controlled hydraulic systems. They provide reliable and consistent operation under extreme conditions and are ideal for use in high pressure hydraulic actuation where a minimum amount of fluid is required to actuate the valve.

ASCO EF8017G1 Power Technologies X-PROOF,PULL-TYPE SOLENOID

The X-PROOF® Isolation Valve is designed to protect sensitive electronic circuitry from transient voltages and currents that exist outside the circuit. The X-PROOF® isolation valve will operate at a minimum of 10,000 V peak and 10,000 V RMS .It is an intrinsically safe device providing complete electrical isolation from 600V through 50kv.

Designed for harsh environments and extremely rugged applications, the APT EF8017G1 Power Technologies X-PROOF,PULL-TYPE SOLENOID is specially engineered to provide long lasting protection in outdoor electrical power equipment. The non-corrosive powder coated steel body and stainless steel actuator are designed to withstand the harshest conditions. This solenoid is available in both normally open and normally closed configurations with either a 24 VDC or 12 VDC coil.

The ASCO EF8017G1 Power Technologies X-PROOF,PULL-TYPE SOLENOID is a type of solenoid that is used to select one of two possible electrical circuits. They are used in applications where accurate positioning of the switch and high sensitivity to shock and vibration are required. The asco ef8017g1 solenoid comes with a stainless steel body and coil, zinc plated mounting screws, neoprene pad, vented cap and a 3/8" NPT conduit fitting.

X-PROOF technology eliminates the risk of premature failure of the solenoid due to dirt, moisture, and foreign materials. X-PROOF solenoids are designed to withstand harsh environments and resist clogging by debris. The X-PROOF technology incorporates a filter screen over the coil ports that prevents dirt and debris from entering the solenoid housing. This mechanism also keeps contaminants from entering the electrical field and causing premature coil failure. The screen allows air flow into the enclosure at all times, so that moisture can evaporate naturally.

The ASCO EF8017G1 Power Technologies X-PROOF,PULL-TYPE SOLENOID is an Assistant Control Operator (ACO) relays for general purpose use. The relays can be used with solid-state or electromechanical devices like limit switches, push buttons or pilot lights.