ASCO JB821453CSA "1""N/O VENT VLV

"1""N/O VENT VLV

The ASCO 280023 -120/60,110/50 Brass Body Hot Water and Steam Direct Acting Miniature Valve is a direct acting valve that can be used for applications requiring both hot water and steam in the same system. Our valves have been designed to handle high pressures, temperatures and contamination levels in the most demanding applications.

The ASCO 280023 -120/60,110/50 Brass Body Hot Water and Steam Direct Acting Miniature Valve is a 2-way normally closed valve designed to shut off the flow of steam or hot water in response to an electrical signal, reducing energy consumption. This fully welded brass valve body constructed of nickel silver is designed for steam and hot water applications in plumbing systems or heating vessels that require temperature control.

This ASCO 280023 -120/60,110/50 Brass Body Hot Water and Steam Direct Acting Miniature Valve has the traditional design of ASCO mini valves. The 1/4" NPT connections have a high and low side. The valve can be installed horizontally or vertically and are used to control hot water or steam. A wide variety of temperature control applications are possible with this ASCO mini valve including: controls for dishwashers, ice makers, humidifiers, water heaters and hot water tanks.

The ASCO 280023 -120/60,110/50 Brass Body Hot Water and Steam Direct Acting Miniature Valve, 1/4" Pipe Size, 2-Way Normally Closed, PTFE Sealing, 5/32" Orifice, 0.52 Cv Flow, 120V/60 Hz, 110V/50 Hz is a two way normally closed valve used in hot water and steam heating systems. This valve is constructed of brass and features PTFE sealing.

The ASCO 280023 -120/60,110/50 Brass Body Hot Water and Steam Direct Acting Miniature Valve, 1/4" Pipe Size, 2-Way Normally Closed, PTFE Sealing, 5/32" Orifice, 0.52 Cv Flow, 120V/60 Hz, 110V/50 Hz is a valve that is used for hot water and steam piping systems. This product is made of brass with a nickel plate finish that provides corrosion resistance and durability. The valve has two ports with one normally closed port and one normally open port.

MetroPac's mini valves are often used in pneumatic or hydraulic applications where through-hole mounting is required. They can be used in a wide variety of process control and instrumentation applications.

1/4" NPT 2 WAY N.C.

Miniature valve, fully rated.For use on 120/60,110/50 VAC 1/4" NPT. 2 WAY N.C.

The ASCO 280023 -120/60,110/50 Brass Body Hot Water and Steam Direct Acting Miniature Valve is designed for use on hot water or steam at 120 volts, 60 hertz and 110 volts, 50 hertz. The valve has a 1/4 inch pipe size and a brass body.

This Brass Miniature Valve is designed for Hot Water and Steam. It is a Normally Closed, 2-Way valve. The maximum temperature of the medium at the full open point shall not exceed 580°F (300°C), maximum pressure of the medium at the full close point will not exceed 125 psi.