ASCO SC8210G202 Power Technologies 1/2"N/C 120V VLV.W/SPADE CONN.

"1/2""N/C 120V VLV.W/SPADE CONN."

@@|ASCO SC8210G202 Power Technologies 1/2"N/C 120V VLV.W/SPADE CONN.ETSThis is an ASCO brand router photoelectric swtich. This was a special order buy because they are a really hard find, but it ended up not working in the application I ordered it for. It's been tested and appears to be in good working condition.

Let's face it: replacing a boiler thermostat isn't what anyone would consider fun. However, with the ASCO SC8210G202 Power Technologies 1/2"N/C 120V VLV.W/SPADE CONN., it doesn't really have to be an ordeal. First of all, you'll enjoy the quick and easy installation process. Second of all, you'll appreciate how well this device works to help stabilize your boiler temperature while keeping energy costs low.

The ASCO SC8210G202 Power Technologies 1/2"N/C 120V VLV.W/SPADE CONN. has a robust 1/2 HP motor that produces excellent torque and cutting speed for fast, efficient operation. The open back of the motor enclosures provides easy access for wire connections. The vacuum slides on and locks into the motor and the large wiring holes are designed specifically for flat sheathed wires.

The SC8210G202 Power Technologies vane motor is designed and built with state of the art technology to offer the most efficient products available. A full line of 1/2-inch round shaft, direct drive, 208/230 volt models are available in special purpose thru hole spade connector and limit switch versions. Not only are these products more cost effective than aerospace designs but they can be ordered through ASCO's toll free number at no extra charge.

Looking for SPADE style air valves?   ASCO's standard-duty, 1/2"NPT air valves include a standard-duty plug and cap assembly and are suited for general service applications. The power unit is made of brass with steel bonnets. All air valves have a manual reset safety relief valves, self-closing action (when pressure is released), and flow control using a spool operator (flow valve) or a shunt operator (for shut off only). The air valve body is bolted to the power unit for easy disassembly.

Designed for the professional plumber, installer and do-it-yourselfer. The unique features of the SPADE connections allow you to push the fitting past the 6-8 opening of the entrance pipe, then pull back on the handle to lock it in place.  This feature virtually eliminates leaks.

Connect the supply air and return air ducts directly to the unit with the supplied 3/4"" flexible connection to maintain constant air volume. The flex connection can be extended up to 10 feet without affecting efficiency or cooling capacity. No need to use expensive plastic elbows or vinyl bulkhead fittings. This power technology terminal unit is designed for use in new construction applications but can easily be adapted for a variety of retrofit applications, like plugging into an existing wall, eliminating the need to cut sheetrock