Honeywell 2028 Dummy Sensor (required if fewer than 5 sensors installed) for All MultiRAE Models (C03--000)

75VA TRANS 120V-24 FOOT MOUNT

The 2028 dummy sensor is required to power all MultiRAE analyzers if fewer than 5 sensors are installed. This is a 75VA transformer for the 120V line with a 24 foot cord that eliminates the need to mount a separate wall outlet near the analyzer.

Your safety is our chief concern, which is why we've designed the MultiRAE to protect all your essential life-support systems. The LifeAlert MultiRAE will detect, monitor, and display conditions that could affect your safety. Mount this dummy life support sensor near a window, patio door, or fire exit of any room in your home or workplace. You can wire up to 5 sensors directly to the LifeAlert MultiRAE and protect up to 10 rooms with just 1 system! 75VA Transformer - 120 V - 24 volt AC (USA + Canada).

The Dummy Sensor, required if fewer than 5 sensors are installed, provides the equivalent of one (1) detection point only. It can be used to activate two (2) devices such as smoke alarms in a room or a backup battery for remote sensors. It provides protection of 120VAC equipment at a 25 foot distance and is intended for permanent installation only.

The 2028 Dummy Sensor with green dot is required if fewer than 5 sensors are installed in a MultiRAE model. This sensor is not part of any active functions or alarm testing of the device, but it does appear that there must be at least one real sensor connected for the unit to be functional.

The Honeywell 2028 Dummy Sensor (required if fewer than 5 sensors installed) for All MultiRAE Models (C03--000) fits all MultiRAE® II series air quality monitors. This inactive sensor with a CA06-026 connector facilitates installing multiple sensors to the same monitor.

The C03--000 is a dummy sensor for used in conjunction with a MultiRAE gas monitor to monitor emissions via an air sampling pump.

Sensor is a critical accessory for measuring and recording the levels of Asbestos, Lead Paint and Toxic Dust in a building. This dummy sensor, when used in conjunction with working sensors, can be set up as an Alarm System by utilizing Relay inputs on the MultiRAE Data Collector.