SCHNEIDER ELECTRIC 21912 AV430 Valve Linkage for MK 6000 pneumatic actuator

VALVE LINKAGE

This SCHNEIDER ELECTRIC 21912 valve linkage is designed for the MK 6000 pneumatic actuator and has multiple diameters to fit the different sized ports needed. Valves, actuators, and attachments are engineered to work together as a system to actuate equipment such as panic bars, doors, or draw slides.

The valve linkage is the system that makes the air supply work. It supplies air to both sides of a camshaft right or left as required. The task of a linkage is to connect a source of power and the moving parts that are to be driven by it.

The valve linkage simplifies the mounting of the valve. The service technician just has to mount in place this assembly, thus saving a time consuming and difficult step during installation.

The 21912 Valve Linkage for MK 6000 series is used to connect actuators with closed loop control systems or a pressure sensor (pressure transducer) to a level transmitter valve. For use with MK 6000 Series pneumatic actuator.

The Schneider Electric 21912 AV430 is a valve linkage (normally mounted to the valve box) that delivers high performance along with maintenance convenience. It is suitable for use with MK 6000 Series pneumatics, which control medium voltages up to 430 V three- or one-phase systems. The valve linkage also helps protect against over-current, short-circuit, and over-voltage, as the contactors are integrated into each contactor chamber.

Don't throw away a perfectly good pneumatic valve just because the linkage is worn or broken. The new 21912 valve linkage for MK 6000 actuators allows you to reuse your existing pneumatic valves. This linkage fits all MK 6000 actuators and is compatible with other brands of pneumatic valves.

The valve linkage for MK 6000 is designed to replace the factory original linkage. It features a direct replacement for the factory valve linkage to function exactly like the original valve linkage. This AV430 valve linkage kit comes with all of the needed components to complete a repair, including cable and mounting hardware. This repair kit is suitable for use with MK 6000 actuator assemblies.