AMANA 166883 Amana HEATER ELEMENT, 9.50 KW

HEATER ELEMENT, 9.50 KW

Element is a replacement part for select Amana brand gas, slide-in and built-in ranges including CSED219BE, CSED229BE, CSEF227BE, E2136A1BBB 110-120 volt 60Hz 9.50 KW 3 Phase Profile Heater Element

Element, 9.50 KW

This replacement heater element was made for the AMANA AFRA1408EQ, AFRA1508EQ and AFRA1608EQ. This 9.5 Kw element is designed to fit the PCB #'s H511041XX0, 5111041XX0, 51120340YY. The product dimension is 6 x 4 x 12 inches. The part is used with equipment having a voltage of 120-240 and a tank temperature of 80 degrees C. ``

This replacement heater element has an overall length of 10.5-7/8", a length of element wire of 9-9/16", and a diameter of 13/32". It is used for electric wall heater models: [1] EHT0612X030 **** [2] EHT0612X040 **** [3] HE10001 **** [4] HE10008 **** [5] HE10009 **** [6] HE10010 **** [7] HE10011

The Amana AMH95550 air heater element is the original replacement for many Amana models, including DSQ755DQ1, DX750HDXA. This coil measures approximately 8.26 inches in length and 2.63 inches in height. The number one cause of failure for an air conditioning or heat pump system is a faulty thermostat or a faulty portion of an air conditioning system such as a circuit board, compressor, or condenser fan motor which is in need of

Lemon Yellow, Cafe Style. This heat element is used in the following Amana models: EL632, EL642, EL644. It measures 17 inches high by 7 inches wide by 1 5/8 inches thick, and has 2 prongs on top for connecting to the wiring.

This HRF-335K24/99 is a genuine replacement part for many brand names and models of furnaces.