BASO K17AT-24H 24 inch K17-Series Universal Thermocouple (25 - 35 mV)

24 INCH THERMOCOUPLE

This 24 inch thermocouple features a K17-series sheath, which is usually used for low voltage and high temperature applications. The large diameter allows for easier and quicker insertion of thermocouples into process lines to obtain readings.

A 24 inch, K-type thermocouple for use with the TC10 universal controller.

24-inch Thermocouple K17AT-24H for exact temperature measurements of thermal process media. The thermocouple is used as a temperature measurement (probe) to measure the temperature of thermal process media like steam, water, air, oil or other liquids with high accuracy and reliability. A spatially stable signal which you can use to record your process or control it by using a BASO or third-party controller. BASO Thermocouples are used when reliable temperature measurement in far distances, high temperatures or high pressure conditions.

The BASO K17AT-24H 24" K17-Series Universal Thermocouple with 25' cable is made of medium braid, stainless steel clad type T thermocouple wire. This thermocouple comes with a 25' K17-series, 40 mm (1.5 inch) diameter probe. The loop has a ferrule at the end for connecting to the thermowell or PTFE liner. The inner conductor is copper clad stainless steel and the insulation is PTFE.

The K-17AT series is a 24" (61 cm) long non-coated 316L stainless steel thermocouple wire with an applied coating of high temperature varnish. It can be used to measure the temperature of liquids, solids and gases both near the surface as well as deep inside a container. This thermocouple is used for cooking in a variety of industrial applications including ovens, smokers, food service equipment and hot oil systems.

The BASO K17AT-24H 24 inch K17-Series Universal Thermocouple (25 - 35 mV) has a positive temperature coefficient and is ideal for measuring constant temperatures. These thermocouples have good linearity and can be certified to traceability standards.

BASO's K17-Series universal thermocouple is 24" in length and is designed to be inserted into a diagram or pictorial chart that displays the heat level of the test material.