Belimo B229+LRB24-SR "1 1/4""BALL VLV NSR PROP. 10cv"

"1 1/4""BALL VLV NSR PROP. 10cv"

B229+LRB24-SR "1 1/4""BALL VLV NSR PROP. 10cv"

The electronic, proportional B229+LRB24-SR "1 1/4""BALL VLV NSR PROP. 10cv" ball valve is designed for use in hot and cold water distribution systems. It has been enhanced with a built-in pressure sensor that monitors the incoming flow­­pressure and allows for optimal performance of the valve. This, combined with the B229's proprietary energy saver mode, gives you total control and savings.

Belimo B229+LRB24-SR "1 1/4""BALL VLV NSR PROP. 10cv", Ball Valve, Series: B229, ANSI Class 150, NPTF, Body Material: Bronze (PVC Lined), Female Inlet x Male Outlet x 1-1/4 in

The Belimo B229+LRB24-SR 1 1/4" Ball Valve with NSR Proportional Top has a 1 1/4" diameter sealed top connection and a 1.1" female pipe size. It is for controlling flow or pressure of water, air, steam, gasoline or other fluid in a system or equipment.

The B229+LRB24-SR is a modification of the standard B229 Ball Valve that can be mounted horizontally or vertically. The mounting flange is extended on the side opposite the handle so it may be mounted either horizontally or vertically. This mounting flexibility is ideal for spaces where space constraints prevent ball valves from being mounted in a single orientation. This NSR Carbon Steel Body Ball Valve, (10 CV, S) is rated for 10 cycles per hour and has a maximum pressure of 575psi.

This ball valve with a brass alloy flexible frame has a non-shifting and non-rotating stainless steel ball, which is securely held by the ball seat. The stainless steel body is highly resistant to chemicals, temperature extremes, and abrasive conditions. , Brass alloy flexible frame connected to the body with high tensile strength phosphor bronze screws , Stainless steel balls are secured in an exclusive Polyphosphate coating

The B229+LRB24-SR Ball Valve Controller provides simple and safe control of the flow in heating circuits. Controlling the rate of flow, a robust and strong device can be installed to take other influencing factors into account, for example, max flow temperature or safety shutdown. And modular construction with matching flanges allows you to build it into a complete solution specifically tailored to your needs. All our valves use 100% Swagelok® components for consistent and dependable performance.