Belimo FSLF24 Aircontrols (USA), Inc. 35"# 2-POS 24V F/S DAMP ACTUAT

FIRE/SMOKE 24v

FSL-F Series TimeDelay Switches DIN rail mounted Fire/Smoke Sensors. California State Fire Marshal approved for fire suppression system, commercial and industrial applications. 4 wire, 24v DC Open Frame Switches with built in Reverse Current Protection (R.C.P.)

The Belimo FSLF24 2-Position, 2-Speed Wall Actuator can be used with all 15/24 volt Fire/Smoke dampers as listed below.

The Belimo FC-L24 is an air operated actuator with manual override for Fire/Smoke dampers. It is designed for use on the fire rated doors in accordance with underwriters laboratory standard UL 10C and American national standards institute ANSI/BHMA 156.22. This actuator requires 24Vdc Compressed Air Supply for operation, up to 6’ F/S damper travel. The FC-L24 is a direct replacement for any FC actuator using

The Fire/Smoke Dual Actuators are designed to provide the same high performance fire dampers as the standard, but with an added capacity. The effects of fire and smoke have the potential to create large amounts of heat, resulting in smoke that can fill the space very quickly. When installed on a door, ceiling or wall, these act... ## A unique combination of speed and agility created from the balance between power and energy efficiency

FSLF24 air controls are positive-acting, spring-loaded dampers with a dual-position mounting foot. These fire/smoke dampers are built to resist high temperatures and filterable smoke for up to 60 minutes, and has been tested by an independent testing lab and proven to meet the UL standard 2079.

In addition to conventional damp actuated smoke control systems, we provide superior fire control systems, featuring our own B1L24S (B1-L) damp actuated smoke control actuator. These actuators are designed for use with large diameter openings, and have been certified in accordance with UL 1363-Compliant “Smoke/Fire” requirements.

When humidity or heat is a factor, the Belimo FS-LF24 fire actuated dampers are an ideal selection to regulate temperature, pressure, smoke and fire tightness. These dampers are self-restoring and are available in air inlet and exhaust versions, with or without integral auxiliary damper. The top mount designs provide the ability to match the damper with a variety of enclosure profiles.