Belimo FSNF24-S-FC 24v S/R Fire/Smoke Act ON/OFF

24v S/R Fire/Smoke Act ON/OFF

This 24v S/R Fire/Smoke Act ON/OFF is suitable for use in NEMA 4X or 5 duty. It has a 3000/5000 hour rated service life with the same end of life. Built to CE and UL standards, this device is approved and listed in the Automation Direct control panels Approved Component List. It does have three terminals 1-NO 2-NC/COM 3-NC. The FSNF24-S-FC is available in red color with white LED indicators, it does have a normal operation indicator built in and also an alarm function built in. The switch assembly

The FSNF-24-S-FC 24v S/R Fire/Smoke Act ON/OFF is a normally open fire/smoke detector designed to switch an equipment load. The detector has 4 wire terminals and is supplied with a multi-lingual operating guide, which includes information on the unit being installed.

The Belimo FSNF24-S-FC 24v S/R Fire/Smoke Act ON/OFF is a switch. The product comes with the part number of FSNF24-S-FC. It fits for 0, 600mA resistive and inductive loads (fixture load not more than 50W) in all locations. The output may be connected to any of the 24V power supply circuits. The control circuit should be connected between terminal 30(-) and an existing contact of any type of fire alarm system or other devices that need to be switched on or off.

Personal protective equipment is often required by regulators to inhibit contamination of live circuits. Belimo FSNF24-S-FC 24v S/R Fire/Smoke Act ON/OFF creates a unique new solution with a two pole, four position circuit breaker in a compact 12 x 53mm IP67 rated metal case and it has been specifically designed for air handlers operating at low temperatures.

The FSNF24-S/R Fire/Smoke Actuator switch for DC motors has red and green LEDs to handle emergency close operation in high ambient light conditions and a built-in relay output (1 NC and 1 NO) for an actuator or control circuit. The four position rotary switch allows Forced Stop, Remote Start, Auto Restart and Momentary operation. A selecton of On/Off is actuated with push buttons – either momentary or spring return to the Off position.

The FSNF24-S-FC 24v Fire/Smoke Actuator is conventional, low voltage, AC or DC control for fire detection and smoke/fire alarm systems, designed to activate a fire alarm system to illuminate the appropriate annunciator and/or activate warning devices such as bell systems, strobes or horns.

The FS and FM series are fire/smoke actuated solenoid valve switches designed to install in fire/smoke control panels or load centers. They have built-in magnetic trip devices, and can be equipped with limit switches and pilot lamps for local indication of fault, as required. When the fire/smoke sensor detects a rising temperature or smoke they open a normally closed contact which de-energizes the supply circuit before irreparable damage is caused.