Belimo FSTF120 | US | Fire & Smoke Actuator | 18 in-lb | Spg Rtn | 120V | On/Off | 1m Cable

FIRE/SMOKE ACTUATOR 120V

THE BELIMO FSTF120 US IS A UNIVERSAL, 120 VAC, FIRE/SMOKE ACTUATOR WITH 1 METER CABLE, 18 IN-LB SPRING RETURN. THE OPERATING PRESSURE RANGE FOR THIS ACTUATOR IS 1 PSI TO 10 PSI (0.07 BAR TO 0.7 BAR). IT IS DESIGNED FOR STATIC PRESSURIZED WATER DISTRIBUTION SYSTEMS. THE ACCEPTABLE FLOW RATE RANGE IS 1 GPM TO 10 GPM (3.8 LPM TO 37 LPM).

The 120V, 18in-lb Fire/Smoke actuator FEATURES: Models FSTF120, FSTF125 and FSTF135 feature an olive green pad (FSTF135 only) 20 ft cable Note: Can be used with Fire or Smoke command stages or devices. For Fire applications the actuator should be PGM connected to another device or a door operator. For Smoke applications it should be SPST connected to a smoke detection station.

Our Fire/Smoke Actuator unit is designed to interface with any of our electronic controllers. This actuation output device has been designed to operate in conjunction with a smoke and fire alarm as a fail safe means to completely shut down the ventilation system. When activated this single pole, normally open device will send a ground signal to any controller set up to accept an FSTF120 input.

The Belimo FSTF120 is a fire and smoke actuator that works with up to 3 stages of the fire detection system. This fire and smoke actuator is UL listed and is 120 VAC/60 Hz. It features an 18 lb magnet, and 1 meter cable.

Our single-phase fire/smoke actuators are designed to automatically shut off the flow of gas to a space in as little as 1 minute when a high temperature/high humidity sensor is activated. When the high temperature/high humidity sensor senses conditions that could lead to a dangerous situation, the valve shuts off the flow of gas to the space heating or cooling system quickly and safely, helping ensure your family's safety.

The fire/smoke actuator provides automatic shutdown of the elevator car in case of fire or smoke condition.

The Belimo FSTF fire/smoke actuator converts a two position thermostat into a system that turns on a fan or heater when unsafe conditions such as high temperature, high humidity, or smoke are present.