BOSCH AUTOMOTIVE SERVICE SOLUTIONS RRRA19480 O RING KIT*

O RING KIT*

(For use with other Med Corp products)

Med Corp's cables are of the highest quality and come with a lifetime warranty against defects in materials and workmanship

The M38/M9 connector connects to the same pin number on both ends of the cable

The easiest way to identify if you have the correct cable is by identifying which connectors go to your monitor and device

This cable is used to extend the length of a standard 9 pin data cable from the PLC to a remote location

It acts as a repeater, receiving the data from the vehicle and retransmitting it to the terminal device

It can extend connections for up to 2000 feet (610 meters) in a straight line configuration

Our product is a high quality J1939/J1708 9-pin repeater cable with Atari End

It is typically used in marine applications to extend the distance between a device and its monitor

5m)

J1939/J1708 9-pin Repeater Cable with Atari End, Length: 3

J1939 9 pin Ethernet Cable for connecting to a 9-pin serial port

OTC's OTC-3101-33 cables are used for communication between CCS (Computer Control Station) and DDEC

If a picture is worth a thousand words then why not use the OTC -3101-33 to speak volumes?

This is the most common type of cable used for onboard computers with J1939 and J1708 OBD2

The high quality hardware connectors ensure that there is no computer interference or signal problems

The length of the cable is 5 ft (1

The OTC-3101-33 cable is a heavy duty, 9-pin J1939/J1708 data cable that connects to the ELD, engine or transmission of the truck and then to an Atari computer

The CABLES for the MED Corp OTC-3101-33 J1939 to J1708 (Atari) 9-pin Repeater Cable

For example, with OTC® products, it is easy to identify which end of the cable goes where as each of our cables have different ends

This allows you to connect up to seven feet away

This cable is an extension cable that is designed to extend the distance between a J1939 or J1708 vehicle and a terminal device, such as a handheld computer

OTC® OTC-3101/33 Cables are used as an extended 9-pin J1939 repeater cable or an extended 9-pin J1708 cable, depending on the connector

The Atari end goes into the device and the RS485 end goes into the monitor

The J1939/J1708 9-pin Repeater Cable allows you to connect two compliant devices that use the J1939 or J1708 protocols