Browning 1VP30X1/2 Variable Pitch Sheave, 1 Groove, Finished Bore, Cast Iron Sheave, for 3L Section Belt

"CIsheave1/2""Bore2.87""DiaSingle"

Available with either A belt or B belt, Browning Sheaves are manufactured in the USA to meet the needs of a diverse customer base. All sheaves feature split tapers for easy loading and unloading and are available in a variety of sizes with various groove configurations.

Casts iron sheaves are used in the manufacturing of a wide variety of mechanical equipment, including conveyors, pulleys, gears, motors and pumps. Cast iron sheaves are essential for the proper functioning of machinery. Sheaves are also commonly referred to as pulleys or drums. Split taper sheaves have two grooves cut into them at a predetermined angle to accommodate belts with a specific belt angle. Sheave bearings can be manufactured with or without flanges and can be in the form of split taper bearings, tapered bearings (obsolete) and cylindrical bore bearings.

Browning 2B68Q Split Taper Sheave, Cast Iron, 2 Groove, A or B Belt, Split Taper Sheave , Uses Q1 Bushing

This 2-groove, high quality sheave is available for either A or B type drive. It is used in conjunction with the Q1 bushing to mount an engine on a boat. The sheave features a split taper design and is cast iron.

This Split Taper Sheave from Browning is a sheave for A or B belts, 2 groove. It has a split taper bushing. It's made of cast iron, and it measures 7.15 inches in diameter by 9.44 inches long with a tolerance of +0.000 / -0.005 in..

Our Browning 2B68Q 7.15" Split Taper Cast Iron A or B Belt 2 Groove Q1 Bushing uses Q1 bushing for shafts. The sheave is made of cast iron. Its belt width is between 1/4 and 3/8 inch in diameter.

Cast Iron 2 Groove Split Taper Sheave, with Quick-Change Bushing. This sheave should be used with a 2-1/8 in. pitch A or B belt. QC Bushing not included.

This Browning 2B68Q Split Taper Sheave, Cast Iron, 2 Groove, A or B Belt, Split Taper Sheave , Uses Q1 Bushing is a great item manufactured by Neuco Inc. Browning is the manufacturer.

The Browning 2B68Q Split Taper Sheave is used on the driven end of a belt drive conveyor that uses a split taper 2 groove belt. The sheave will accept belts from 1/2" to 3/4" in width and has an operating temperature of -20 to 250 degrees F. The sheave has grease fittings for A or B belts and weighs 24 lbs.