Browning AK30X7/8 Finished Bore Sheave, 7/8" Bore, Uses 3L, A Belt, 1 Groove

"PULLY 7/8"" BORE 3"" DIA"

This Standard Grade AK Pullys are designed to a meet a requirement for an economical replacement for 3L1311.

Keep your straps and hoses in good shape with this polished stainless steel roto-molded pully. Since Browning uses the correct 3L belts on their tractors, this pully is made to use the same belt size.

This Browning AK30X7/8 Finished Bore Sheave is used in the endless plain pulley system to transfer drive force from the endless belt and provide a mechanical advantage. It is built for pulling, not pushing, and has a solid shaft with an accuracy of 0.005". The sheave features one grove and utilizes 3-L (3/32" x .036) size belts.

The AK30X7/8_Finished Bore sheave is a tool to help speed up the change of large diameter textile reinforced belts especially when compared to the more traditional "brass bushings." It also eliminates the need for a cover plate often needed on a bushing installation. The polyurethane finished bore directs the belt load onto the centerline of the pulley allowing for belt tracking.

The AK30X7/8" Finished Bore Sheave uses a 3-1/2 x 8 belt and is used to convert the X30 Plus wireline unit into a shallow profiling tool.

Multi-purpose sheave mounted on bronze barrel bearing for hardened 2nd cutting edge

The purpose of a Browning AK30X7/8 finished bore sheave is to support the motor and transfer power to the auger drive belt.