Browning AK59X1 /2 Finished Bore Sheave, 1/2" Bore, Uses 3L, A Belt, 1 Groove

"5.75""DiameterSheave

This item is a Browning Competition Series AK59X1/2 Finished Bore Sheave. It has a diameter of 5.75"", and uses a belt of a width 3L, and a belt of a length 1 groove. The pulling arm is in the A position. This sheave can be used on various rigs to attach slides, reels, spools, take-up reels, etc.

The sheave design on this Drive shaft is well suited for most mid-sized machines. In the long run you will save space and weight because you can use this belt on your belt sander while utilizing the existing 5/8"" pulley without being forced to increase the powered pulley size.

Ak59X1/2 Finished Bore Sheave 2 Bearing 1/2"Bore 3L Belt A Groove-Browning

The AK series sheaves are designed with exceptional durability and toughness for high-demand industrial applications. Each sheave is constructed from a heavy-duty, hardened steel main shaft and axle for lasting strength in the most demanding conditions. Coolant grooves around the entire main shaft ensure proper lubrication to reduce heat buildup and extend wear life.

Shaft is 1-3/8"" long.

Browning AK59X1 /2 Finished Bore Sheave 1/2" Bore Uses 3L A Belt 1 Groove has a 4" length. It's dimensions are 9" Height x 8.5" Length x 2" Width and it weighs approximately 2 lbs.

A sheave is a pulley with an attached grooved wheel for ropes and cables. It can also be called a drive sheave, propulsion sheave, or a motor sheave. Sheaves serve the same purpose as pulleys but are generally more compact, often used where space is at a premium. The spigot is designed to fit rope or cable up to 1/2 inch in diameter.