Browning AK71H Bushed Classical Gripbelt Sheave, 4L or A, 3L Belt, 1 Groove, Uses H Bushing

"1GrooveSheaveHBushing6.95""dia."

Neuco Inc's bushings and sheaves are designed and manufactured to provide maximum efficiency available in a non-metallic sheave

This sheaves permits belt movement from side to side (slack) and fore-and-aft movement (slack or tension)

, measures 6

Browning AK71H Bushed Classical Gripbelt Sheave, 4L or A, 3L Belt, 1 Groove, Uses H Bushing Browning's Bushed Classical Sheaves are designed for use on wire rope that is not worked hard

They are non-rotating, with no moving parts and present a minimum of rotary inertia

95" in length, and has a width of 3"

Browning AK-71H Bush Belt Sheave 4L or A, 3L Belt, 1Groove, Uses H bushing

This Browning AK71H Sheave Bushing is made of steel, and is a replacement part

Browning AK71H Bushed Classical Gripbelt Sheave, 4L or A, 3L Belt, 1 Groove, Uses H Bushing This sheave is designed for use with 3-1/4" belts and is compatible with ratchets and drives that feature a H-style bushing

The Browning AK71H has a diameter of 6

This is accomplished by combining state-of-the-art technology with the most advanced engineering techniques

95", and comes in various models

The mounting hole in this assembly is one inch diameter

Browning AK71H Bushed Classical Gripbelt Sheave, 4L or A, 3L Belt, 1 Groove, Uses H Bushing

The Bushed Classical Sheaves are furnished in a variety of sizes and basic sheaves types to meet most wire rope operating requirements

This product weighs 0

78 lb

The design provides for a tight fit between the sheave and the center of the drive's bushing

The slot allows the belt to move freely from side to side

AK71H Bushed Classical Gripbelt Sheave, 4L or A, 3L Belt, 1 Groove, Uses H Bushing It is an assembly used with a belt drive to transmit power from the motor to a handpiece

It is intended for use with a groove type bushing

This assembly is designed with an internal spring and should be mounted in a firm support base of approximately 2" depth

It is the part that is attached to the belt and accepts the reel