B Series Split Taper Bushing with 1 15/16" Bore and 1/2" x 1/4" Keyseat
B Series Split Taper Bushing with 1 15/16" Bore and 1/2" x 1/4" Keyseat
The B Series Bushing is a split taper 1-1/2 bushing that has a 15/16" bore, 1/2" x 1/4" keyseat and is made of 303SS. The 15/16" bore fits over the 7/8" stem of the split taper crankshaft. It is designed to allow the crankshaft to rotate inside the bushing and maintain a tight fit and minimal backlash during engine operation.
Split Taper Bushing is used for alignment and support in machining operations. Made of 4130 Chromoly, hardened and ground. Stock Sizes include: 3/4", 1", 1 13/16", 1 15/16", 2".
The B-1 Bushing is an extremely popular bushing with archers. From primitive bows that need a lot of forgiveness to today’s high performance compound bows, B-1 Bushing is the perfect bushing. First introduced in 1985 with the release of the B series, the B-1 has become a legend in its own right. This relatively heavy design offers more forgiveness and features a tapered split taper for easy fit and installation.
Machined from aerospace grade aluminum alloys, only Browning components are precision cut to provide the perfect fit. This Split Taper Bushing features one half of a split taper for cleaning rods and the other half for cleaning guns. The B 1 15/16" Bushing fits Browning bores 1 15/16" in diameter with a length of 2-1/4".
Browning split taper bushings allow you to easily disassemble your Browning bolt or Rem/Win bolt for cleaning and service without losing any parts. They will work with any barrel threaded 1-15/16" x 20 TPI or 22 VM 3 B/B, which is probably the most common thread pattern these days for modern firearms.\
The Browning B Series split-taper bushing is used to install split-taper recoil pads on Remington shotguns. The Browning bushing helps prevent barrel nut creep, and can be installed with light hand pressure.
Free Shipping
In stock
