JOHNSON CONTROLS C-2220-12 SLAVE FOR NON-RELAY SLAVE FOR NON-RELAY

#SELECT SLAVE MOD LOW VOL INPT

This is a slave relay, slave relay, #select slave mod low vol inpt, to be used in conjunction with a 24V AC or DC Johnson Controls master relay. The slave must be mounted on the same board as the master relay. It loops back power from the input terminals so that it can be used as a "slave" or secondary contactor with the same control system. Applications include: all position power windows, electronic door locks and high current, heavy-duty solenoids.

Industrial Control, Electric Motor Protection, Power Supply, Johnson Controls

The JOHNSON CONTROLS C-2220-12 SLAVE FOR NON-RELAY SLAVE FOR NON-RELAY is an 12VDC slave with a 1.5 Amp max load. It has a 2 lead cable (plus ground). It requires a 24 VDC non relay master. The unit dimensions are 9.14 in x 5.0 in x 3.94 in (23 cm x 12.7 cm x 10 cm) and the weight is 0.45 lbs (0.2 kg).

This durable, energy-efficient slave contactor is ideal for residential and light commercial applications. The compact design offers easy installation, while the rugged plastic housing provides years of dependable service.

The C-2220-12 Slave is a replacement slave for non-relay master Johnson Controls brand thermostats.

We can save you money! Buy used Johnson Controls C-2220-12 Slave For Non-Relay slaves. We have a large inventory of Johnson Controls C-2220-12 Slave For Non-Relay control modules. We are a leading supplier of Johnson Controls C-2220-12 Slave For Non-Relay products.

The C-2220-12 is a 12 VDC, 1.0 amp, non-relay slave for use with the JCI™ relay slave modules (C-2220-01 and C-2220-02). The module contains terminal lugs to connect the electrical load.

The C-2220-12 is a slave/transmitter for use with a variety of Johnson Controls transmitters. The slave/transmitter receives master signals from an existing or new Johnson Controls transmitter. It transmits these signals to other communication devices in the system, such as non-relay valves, equipment or power control panels. The system can be operated manually, by reading status information from the slave/transmitter, place them on programmable schedules or by using off-site signals.

RSLV2 12-24 VDC, SERIAL 2 INPUTS 2 RELAY OUTPUTS