Johnson Controls 7401 C-7355-7 1CHNL 7DAY/120V TIMER SPDT

ELECTROMECHANICAL TIME CLOCK; 1 CHANNEL

The C-7355-7 1 Channel Electromechanical Time Clock has a date and day display, and is used for on/off functions. This unit has a 120V AC power supply, uses standard 120V NEMA type 7 plug in to comply with UL safety standards. The maximum accessory load is 10A@120V/15A@240V. Features include adjustable mechanical timer that increments at one second intervals, can be set to any time increment between 1 minute to 24 hours, has an accuracy of 0.5% of the time set, 7 day totalizer, auto repeat daily cycle at the

The C-7355-7 1CHNL 7DAY/120V TIMER SPDT TIME CLOCK is a electromechanical time clock that provides 24 hour, 7 day programming capability. Digital read out shows date and time in 12 or 24 hour formats. Ten (10) individual daily time settings (00:00 to 23:59). Forward and Reverse switch for motor control. The 1CHNL version is programmable for 1 channel only.

this product is an electromechanical time clock. It functions as a one-channel time clock, using a single relay contact closure for indicating events to the outside environment. the relay is not energized until sensing voltage is applied to the input terminals. The input is accepted via isolated current loop, which is preferable to direct current voltage loop, since the input does not pass through any amplifying electronic circuits.

One channel, 115 Volt AC 15 Amp maximum load, Mechanical or Electromechanical Time Clock, Enclosure Type - NEMA 4, Housing Material- ---"

The Johnson Controls 7401 C-7355-7 1CHNL 7DAY/120V TIMER SPDT is a positive ground electromechanical time clock. It works on 120 volts of AC power, which is typical for US outlets. Designed to last long but with simple design, this time clock comes with an adjustable front door bumper that prevents inadvertent operation. For easy access or maintenance, the coin door can be removed by removing one screw.

With a single-pole design, this 2" line voltage electromechanical time clock controls one ON/OFF time per day. It has a diameter of 1.69" and requires 120 volt AC/60 hertz power supply to run. The control features include Programmable ON/OFF time 1 per day, Duration of 0 to 1 sec., 24 Hour clock format, Push button for manual pulse selection, Single pole operation (Normally OPEN)

The Johnson Controls 7401 C-7355-7 1CHNL 7DAY/120V TIMER SPDT TIME CLOCK is an electromechanical timekeeping device. It consists of two components: The timekeeping mechanism that generates the current hour, minute, second, day of week and weekday which can be used to drive an LED display; and the control circuitry in which the generated time information is compared to the clock's actual time in order to adjust its output in case it deviates from what it should be. The timekeeping mechanism also provides a visual indication where the Time Adjust Pin (TAP) is activated

For homes with multiple rooms, this electromechanical timer clock is an economical solution. It provides the convenience of being able to set one electronics device to turn on and off at different times for each day of the week. With a time setting range of 1 minute to 24 hours, this timer clock also features a manual override button that allows you to manually control your electronics device.

1-Channel; 7-Day; 120-Volt; 24V Battery; Non Return

The 743-5782 is a C-size modular control timer used for basic timekeeping applications. The device has a plug-in connection and is available in single, normally open (1NO), single, normally closed (1NC), or dual (2NO/2NC) configurations. It can be set from 1 minute to 7 days in 1 minute increments and has a jumper for every day of the week plus a common.

The time and temperature controller, which is designed and manufactured electrically and mechanically and acc. To the IEC 60664-1:2006, controls the energy supply functions of electric heating, cooling and ventilation.

Display Type: Digital; Completely Enclosed Fan-Cooled Non-Programmable Timer