Inducer Assembly
The Inducer Assembly is designed to draw circulating refrigerant to the outdoor unit through the main suction line
The Inducer Assembly is a component of your Carrier Refrigerator. It delivers a larger amount of refrigerant to the evaporator than the suction line can supply, which retards evaporation in the evaporator membrane.
Our Inducer Assembly is designed to be compatible with all gas furnaces. Guaranteed Replacement.
The Carrier 326058-756 Inducer Assembly is primarily used in gas furnace and heat pump models. This component measures 0.5 x 0.5 x 2 inches, while weighing 1 pound.
This Inducer Assembly (326058-756) from Carrier is used in select Bryant/Carrier residential gas furnaces and heat pump condensing units. This inducer motor moves the blower wheel at the speed required to match temperature and pressure differential sensors for the flame sensor and overheat detector, which ensure consistent combustion. The inducer motor in this part moves air through the furnace by forcing it to flow against the outside of a rotating disc (the inducer) using an electromagnetic armature. When the inducer rotates, this force causes air to flow through a perforated tube (the diffuser),
The Carrier 326058-756 Inducer Assembly is a genuine replacement part manufactured by Carrier Corporation to ensure the safety of its users. The main component of this part is the inducer motor assembly and the housing. The motor assembly within has several moving parts and requires regular maintenance for it to work properly, thus making replacement necessary sometimes. If the motor fails to engage in heating or cooling a room, it needs replacement. To assure motor operation is smooth, inspect its various parts such as the wheels, bearings, and body often.
This Inducer Assembly is used to help convert gas pressure to suction in the evaporator coil. If you smell gas or hear hissing noises check these parts for damage or wear. Replace worn parts before they fail and cause a fire or explosion.