Carrier 338096-704 LIMIT SWITCH LIMIT SWITCH

LIMIT SWITCH

This LIMIT SWITCH does not come with a wiring diagram or connector information. It was cheap, so I bought it. I had to figure out the wiring myself. If you need a connector or wiring diagram for this device, please purchase this switch from an electronics store.

Carrier Limit Switch checks the limit switch operation by applying voltage or current to the specified contacts and monitoring for continuity. Carrier Limit Switches are provided with the following features: -Series B snaps directly onto size 00 contact blocks as a replacement for standard limit switches.-Achieves precise pole alignment without centering tools.-Saves time and increases productivity.-Will not wear out; must be replaced if damaged or defective.

Limit Switch, P.C. Board Mount, 4 Position, Intermotor

The Carrier model 338096-704 Limit Switch is a limit switch for a hot water tank.

Equipment that is equipped with limit switches are designed for both high- and low-speed applications. The proximity switches spring closes an electrical circuit only when the metal part of a machine comes into contact with or close to the peripheral edge of a rotating

In addition to, or instead of, a standard thermal limit switch, Carrier requires the purchase of a carrier limit switch when installing liquid line kits. The Carrier Limit Switch is an integral part of the control module, which is required for proper operation of the system. For ultra clean installations where floor damage will occur with traditional limit switches that clamp externally to tubing hosing; this new carrier limit switch mounts directly onto a copper supply tube and requires only a brass nut screw to install. Once installed there is no clamp or hardware to touch or damage the piping under the cabinets

The Carrier Limit Switch can be used with any furnace or air conditioner with a limit switch. Choose between two varieties—High temperature or low temperature. The high temperature limit switch is ideal for gas-fired furnaces and the low temperature limit switch works great with electric-ignition furnaces. This Carrier limit switch installs easily. Its mounting bracket slides into place within minutes and each carrier limit switch also features the necessary wiring.