Carrier A18368 RETROFIT CAP ASSY FOR BALL VLV

RETROFIT CAP ASSY FOR BALL VLV

The Carrier A18368 RETROFIT CAP ASSY for Ball VLV is meant to replace the older part number 21817 with a new part number. The main use of this piece is for installation onto the ultracool gas furnace. This part will be compatible with the following models: (6PGC92MB036) or 6PGC98M022 or 6PGC98MB022 or 6PGC98M032 or ECG23NRAFAQ01 or 036DAAJX0505.

Upgrading or retrofitting an existing Carrier heating and cooling system with a new, higher SEER (Seasonal Energy Efficiency Ratio) rating can lower your energy consumption and increase your energy savings. The RETROFIT CAP ASSIE FOR BALL VLV by Carrier is a direct replacement part for the current model G4JX-036-A high SEER cap on the carrier Infinity II series of furnaces which allows for increasing the SEER rating from 15 to 18 on Carrier Infinity II models.

The Carrier Retrofit Cap Assembly for Ball Valve furnaces (A18368) is meant for use with gas furnaces that are manufactured by Carrier Corporation between 1986 and 2006.

The Carrier Retrofit Cap Assembly for Ball Valves (Item A18368) is an easy-to-install replacement component that can be used in most models of Carrier valve controllers. When retrofitting the cap assembly, check manual for compatibility with your product.

The Carrier Retrofit Cap Assembly for ball valve has a front metal guard for added safety.

This part is made up of the cap and ball for the Ball Valve, and is suitable for the Carrier A18368. The cap serves to keep dirt, insects and other undesirable contaminates out of your supply lines.

The Carrier Retrofit Cap Assembly is used for replacement purposes or when worn elbows are to be replaced.