Carrier EA52PH065 Metering Device, Piston

Metering Device, Piston

Carrier EA52PH065 Metering Device, Piston. EA52PH065. 2HP, 70 Series Air Conditioners and Heat Pumps, Packaged Terminal Air Conditioners and Heat Pumps, SPF31XJ070 Air Conditioner/Heat Pump.

The Carrier EA52PH065 Metering Device, Piston provides a means of modulating the flow of refrigerant. It is used to control temperature, pressure, and flow conditions in refrigerating systems.

The Carrier Metering Device, Piston (EA52PH065) is utilized to control gas flow to the gas furnace. It is designed for use with a gas furnace ignition system that uses thermostatic or pilot controls.

The Carrier EA52PH065 metering device, piston is the component in a variable capacity air-conditioning system that directs the flow of refrigerant. It is powered by a motor and converts electrical energy into mechanical energy. Its function is to move refrigerant from heat exchanger coil areas to the condenser unit.

This metering device provides the means for removing or returning refrigerant into a system. It is designed to be interchanged with any Carrier piston type metering device without requiring additional parts. Piston Metering Device has formed steel rod for piston rod. It is specially designed to be used with all Carrier copper or aluminum bodied piston type metering devices.

The Carrier EA52PH065 piston metering device is designed for two-stage gas heating. The EA52PH065 measures the energy consumed in the high stage and the outdoor air temperature before sending that information to a control board. The information is then used to determine when to engage/disengage the low stage of heating.

The Carrier EA52PH065 is a piston-type metering device designed to meter and distribute refrigerant into connected air-conditioning and air-source heat pump systems. The unit has a 1/2 inch NPT inlet for receiving liquid refrigerant from a manifold or bulk tank and two 1/4 inch quick disconnect outlets to the indoor coil units.