Carrier HC30GB232 - Bryant Furnace Draft Inducer / Exhaust Vent Venter Motor - OEM Replacement

1/16HP 208/230V 3450RPM MOTOR

The HC30GB232 is designed for use with a venter fan. It is a 1/16 inch hp 208-230v 3450rpm motor made of steel. The vents have to be used for proper operation of the draft inducer motor. This part is compatible with Carrier brand furnaces but can also be used in place of any other brand venter motor.

This replacement 1/16 HP motor features 3450 RPM, 208/230V voltage and Does Not Include An Air Filter. The motor is designed for use with Carrier Models: 30GB232, 30MB232, 30OG232, 35GB132, 35OG232C, 52G20NC02M3EB and Bryant Models: B24AH-1JCK5B, B24AK-1JFK5B.

Carrier part # HC30GB232, Bryant part # C18255 This motor replaces Bryant part # C18255 and all Carrier 4TNVB units. It also replaces Alliant AC3110, Allen Bradley 35N0068, Armstrong 38K647 and others. It is the same as Unitrol PT130XW001AH (OEM) Dual voltage 1/16HP model for 208/230V operation up to 3450RPM with EMI Protected Thermally Over

The Carrier HC30GB232 draft inducer and exhaust venter motors were made for heating air. The motor typically operates at 3450 rpm and 208/230 V. This replacement motor can be found in single-stage gas, oil, solid fuel, and multi-fuel furnaces. It has an RLA of 7.8 and an overall diameter of 9 1/4 inches. If you need to remove this motor from the venter casing, there are located 5 screws around the perimeter of

The Carrier HC30GB232 motor is for Bryant and has a low amp draw of 1/16HP. Fits gas furnaces. Replaces: HC30GB232, C65B5003D, GY03N0SOA00-0AA0, C65B5003DAA, 0427R-7132. The motor comes with a one year warranty.

Carrier's HC30GB232 Motor is a Blower Assembly for furnace, and is a replacement draft inducer for Bryant models ECH30IIKAA, ECH30IAQAA, ECH30IAPAA. This product is designed to be flushed with the attic floor when installed. To install your Carrier motor, start by turning off the system power and removing the existing motor assembly from your furnace. Next, remove the rubber gasket seal from around the flue collar on your furnace

This motor fits the following Carrier/Bryant units: Bryant Model Number(s) -DOOR TYPE- 30GA, HC30GA230, ECM30A230, ECM30B232, ECM30GA232, ECM30IA225, ECM30OA225.