Carrier HC39GE466 Bryant/ 1/4HP 1100/900RPM 460V MOTOR

1/4HP 1100/900RPM 460V MOTOR

This Carrier HC39GE466 Bryant/ 1/4HP 1100/900RPM 460V MOTOR Heat Pump Condenser Electric Cooling Unit, features aluminum construction, high-strength compressor, stainless steel evaporator coil, and its ducted design means no need for permanent vents.

The Carrier HC39GE466 Bryant/ 1/4HP 1100/900RPM 460V MOTOR offers a max air movement of 4900 CFM, an air class of 130CFM, and an air speed of 126FPM. The IPAR (Inlet Pressure Adjusted Rate) is X, and the static pressure is 10.5". The exterior dimensions are 23-1/2"W x 38"H x 18-5/16"D (889mm x 965mm x 470mm). The net weight is 135 lbs (61 kg). It has five blades that have a diameter of 19

Carrying a rating of up to 115V/60Hz, the HC39GE466 Carrier Bryant 1/4HP 1100/900RPM 460V Motor is an efficient motor that can be utilized in the operation of a variety of products.

The Carrier HC39GE466 1/4HP 1100/900RPM 460V Motor is designed to fit Carrier CHC0251JCH1 and CHC0251JCH2 furnaces. It is also designed to install in Carrier models CHA10C, CHB10C, CHA11C, and CHB11C.

The Carrier HC39GE466 Bryant/ 1/4HP 1100/900RPM 460V Motor is a totally enclosed fan cooled motor for use in dry, outdoor air applications, such as clothes dryers, refrigerators and freezers. It's also designed to be used as an affordable alternative in many condensing units. These above ground and indoor-safe motors are ideal for commercial and industrial applications and will be one of quietest motors that you will ever find.

The HC39E 466 is a carrier grade gas engine air compressor that uses a cast iron and aluminum alloy material construction for efficiency, durability, and quiet operation. This model has a 1/4HP motor that runs at up to 1100/900RPMs.

The HC39GE466 is the Energy-Star qualified Carrier high efficiency 1/4 HP model used in combination with the standard 28CKXE air conditioner to meet the required constant dehumidification Amps per ton for multi-family applications, approximately 20% greater than required for a standard 24CKXE. This motor has been tested and verified with a 3/4" face flange. If you are installing on a face flange that isn't 3/4" please let us know so we can send you the proper motor.