1140rpm 208/230/460 3PH SPLhp
The HD52AK652 A-O Smith Carrier blower motor is a V type squirrel cage induction motor which produces 1hp at full load and has a large 1140 rpm speed. This unit runs on 208, 230 or 460 volt 3 ph power (three phase). The HD52AK652 has a .75" shaft and can be used on Carrier equipment such as a furnace, air handler, condenser, evaporator and is commonly installed for heating, ventilating and air conditioning applications.
The Carrier HD52AK652 OEM Upgraded A.O.Smith 1 HP 208 230 460 v 3 Phase Blower Fan Motor is designed to sustain continuous and repetitive duty cycles. The 208/230/460V unit can have an EBL (extended blower life) option that uses airflow-optimized fan design and advanced technology to increase motor life. This fan motor has a headroom of 2800 feet per minute air velocity and comes with a carbon brush repair kit. The HD52AK652 is designed for use in amperage capacities between 130 amps and 200 amps.
The Carrier HD52AK652 OEM Upgraded A.O.Smith 1 HP 208 230 460 v 3 Phase Blower Fan Motor is designed specifically for use with oil-filled, permanently lubricated compressors in commercial and industrial air conditioning and refrigeration systems. The motor has a permanent split capacitor, type AB1 and TEFC enclosure. This line shaft driven blower fan motor comes standard with a
This Carrier 1 HP 208-230-460 V 3 Phase blower fan motor has a mounting pad that is designed to fit Carrier HVAC models CBPH52AK652 (CBPH52A652) and CBPH52AK652. This blower motor requires 208 – 460 volts of three phase electricity to run properly. It is a great replacement part for your heating and cooling system if your current fan motor continues to short cycle, operate noisily or fail to start. The brand of this product is manufactured by Carrier, which is a trusted name in heating and cooling parts.
The Carrier HD52AK652 1-hp 208-230/460V 3-phase blower motor is manufactured by A.O.Smith, the leader in air conditioning products. The HD52AK652 is a 1 horsepower 480v, 115/208/230/460 volt, 3-phase blower motor that draws 6.0 - 8.8 amps for operation.
This redesigned high-efficiency blower motor from A.O.Smith is compatible with a wide range of Carrier/Bryant and Payne/York heat pumps and furnaces. It runs at 1140 RPM, as opposed to the standard 1000 RPM, uses less electricity to produce the same amount of airflow as the standard motor, and carries a 12-year warranty. Plus, since it's manufactured by A.O.Smith, you can count on its long track record for outstanding reliability.
The A.O. Smith F18 Series Indoor Fan Motor provides vigorous air movement and strong, steady air velocity. These motors are engineered with a cast aluminum, die-cast steel case for endurance of heavier loads and have been tested to ensure quiet performance.